Jump to content
Ultimate Subaru Message Board

Need help ASAP please, broken drive shaft, axle or tranny mounts?


Recommended Posts

That doesn't sound good at all. 

 

If it was the axle I'd expect drivability issues. 

If it was a driveshaft i'd expect vibrations. 

I'd be thinking front diff - drain the oil and check for debris/swimming silvery stuffs. 

 

But things can vary so it's hard to say. 

Link to comment
Share on other sites

Not the rack and pinion. Sounds like the Front pinion gear inside the trans.

Oh no! dammit man.. thats such a bummer if it is since i just got the tranny rebuilt like 6 months ago and I've always kept up with the fluid levels I have another video with a better view of where the clunk is coming from I'm uploading to youtube ill link it here when its done uploading i did the wheel rotation you recommended. In the video i jacked all four wheel in the air and put it in drive mode the front left wheel and axle to the front diff is where the clunking is coming from and is barley moving/able to keep up with the left from passenger side

 

4x the wheel rotation speed. Driveshaft / u-joint or (hopefully not) a bad pinion gear.

Im hoping its the driveshaft/u-joint went bad! Will i have to take off the driveshaft completely in order to see if its messed up because i wasn't able to physically see any damage on the driveshaft or u-joint when I had the car jacked up and also removed the exhaust cover to get a better view of it.

 

That doesn't sound good at all. 

 

If it was the axle I'd expect drivability issues. 

If it was a driveshaft i'd expect vibrations. 

I'd be thinking front diff - drain the oil and check for debris/swimming silvery stuffs. 

 

But things can vary so it's hard to say. 

It doesn't so much have a vibration to it more of a quick hard jolt every four-eight feet of movement regardless if going forward or backwards I am going to be draining the diff fluid to check for debris and will refill it. Should I do the same with the rear diff as well?

Link to comment
Share on other sites

Put it up on a lift and try to turn the front wheels while in park.  Could be a broken short shaft ( between the axle and trans.)  

Ok will do! Man I'm just praying to the subaru gods it doesn't break my bank and then some lol my car won't turn the wheels if its in park even if the wheels are in the air. Im assuming you meant neutral? or maybe It does i don't recall ever trying that. In the video I'm uploading to youtube so i can link here i have the car jacked up with all wheels in the air and in Drive, the left driver side wheel and axle is barely able to keep up with the other side front passenger you will see what i mean when i put the video up the clunking noise is coming from in between the axle (cv joint/boot side) to where it connects to front diff (hoping not from the inside!)

Link to comment
Share on other sites

Might be an axle but kinda sounds like a tooth got knocked off the front pinion gear.

Jack it up and spin the wheels and see if anything makes noise.

 

As I do that while car is off and on park with wheels up I don't hear a noise but it the tranny jolts like an almost up and down movememt

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...