Naked Buell Posted February 11, 2017 Share Posted February 11, 2017 Hey guys. So I my third tail light in my Rx isn't working. I took it out and the bulb is good but I am not getting power to it when I hit the brake pedal. So I obviously have a break in the wiring in my rear hatch. So, my question is, has anyone ever taken apart the hatch shock absorber and ran a new wire through it??? I am thinking of running a new wire. Quote Link to comment Share on other sites More sharing options...
moosens Posted February 12, 2017 Share Posted February 12, 2017 Easier to take the plastic off and search out your break. Start with the rubber boot that ducts the harness into the hatch from the body. Pull gently on the harness and the connector is right there. If that isn't the answer then consider taking down the plastic covers and checking there - on the hatch end of things - if no luck then the rear of the ceiling liner. Quote Link to comment Share on other sites More sharing options...
Naked Buell Posted February 12, 2017 Author Share Posted February 12, 2017 I have all the plastics down. The only wires on the 3 door coupes that goes to the actual hatch goes through the shock absorbers for the hatch. No other wires. That is why I was wondering if anyone has dug into those before. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.