Jump to content
Ultimate Subaru Message Board

Subaru Leone Rear End Swap to 5 lug 5x100


Suber_Tony
 Share

Recommended Posts

Hey Guys, this is created for the experience or already converted 4 lug to 5 lug drivers to help others who want to achieve the same specifications.

 

The front of the Leone Seems to be straight forward to convert to 5 lug 5x100 but the rear end seems to be a challenge given that the XT6 model is rare. I can't get any rear end parts.

 

Could you guys list your rear end set up for 5 lug 5x100? Specifically substitues for XT6 parts

.

Edited by Suber_Tony
Link to comment
Share on other sites

The rear hubs are the only hard part. XT6 are the only OE parts that will fit.

 

Crossbred performance in Australia used to make aftermarket ones to go with their kit, but they no longer do. Might be able to get your hands on a used set....

 

This guy made a run of 10, and sounds like he's going to make another (you might want to skip towards the end of the thread where there's discussion about the actual process):

http://www.ultimatesubaru.org/forum/topic/156161-xt6-rear-hubs-eoi-in-5x100-5x1143/

 

 

I've been working on a FAQ, with some links and information about the 5-lug swap:

http://www.ultimatesubaru.org/forum/topic/162614-retrofitting-faq/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...