Jump to content
Ultimate Subaru Message Board

Recommended Posts

HI,

Please remember to Search, as this is one of the most covered swaps for Subarus - right after the 2.5 to 2.2 swap. :-)

 

yes, this will work. You may have some small differences w/the vacuum lines - the '98 had the Charcoal canister back by the rear of the wagon - the '96 is pass. front under the hood. Also, there may be a wire to the P/S pump sensor on the '98 that won't be there on the '96.

 

Good news is that the '98 has more HP/Torque than the '96 AND it can run on Regular.

 

Remember! Do the Head Gasket/ HG BEFORE you install any EJ25/2.5 engine (2.2 is recommended, too,). Unless you have documented proof they've been done.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...