punx2400 Posted June 23, 2017 Share Posted June 23, 2017 Want to buy a specific set of wheels for my 95 leggy wagon, but they don't come in 5x100 spec. They do however come in 5x114... Can I pull 5x114 hubs from another model and put them in my current bearing housing, or do the 114 hubs/housings use a different wheel bearing also? I'm already going to pull the rear housings off a later model to go with rear discs. Basically what I'm asking, are 114 hubs the same dimensions as far as shaft diameter/length/spline count, to keep my current cv axle and bearing setup? Quote Link to comment Share on other sites More sharing options...
Gloyale Posted June 25, 2017 Share Posted June 25, 2017 Might and I say MIGHT be able to use Early STI hubs from a WRX. (up to '07 I think) They are 114 and I think fit the same bearing. If nothing else get the Whole STI knuckles but that will be more $$$$ Quote Link to comment Share on other sites More sharing options...
Numbchux Posted June 26, 2017 Share Posted June 26, 2017 No. You'll need hubs, knuckles, axles, parking brakes, rear struts, front rotors, rear brakes, probably more. Axles are designed for a wider track width, so you'll either need custom axles, or the GD suspension arms. Gloyale is right, '05-'07 STi is your donor window. All the other 5x114.3 Subaru applications are very different. Quote Link to comment Share on other sites More sharing options...
punx2400 Posted June 28, 2017 Author Share Posted June 28, 2017 Alright. Thanks fellas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.