Mclovin846 Posted July 5, 2017 Share Posted July 5, 2017 I am in search of a rain gutter mounted roof rack for my 1993 Subaru Loyale at a reasonable price. I actually would just like a set of cross bars so I can mount a basket. Anything out there that is cheap but works well? Any recommendations would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
moosens Posted July 6, 2017 Share Posted July 6, 2017 Thule 1050 series from back in the 80's , I have a set and have locking feet. But I'm in CT 1 Quote Link to comment Share on other sites More sharing options...
Gloyale Posted July 6, 2017 Share Posted July 6, 2017 check with Re-Rack in Portland 1 Quote Link to comment Share on other sites More sharing options...
Rust Posted July 6, 2017 Share Posted July 6, 2017 I've used Highland ladder bars (Pep Boys) and other flat lip base type bars. The key is running some securing bolts/screws through the plastic rain gutter into the roof itself on either side of the base clamps. The plastic rain gutter is just clipped to the car, and it needs reinforcement. Especially if you plan on tossing a canoe or kayak up there. Quote Link to comment Share on other sites More sharing options...
Gloyale Posted July 6, 2017 Share Posted July 6, 2017 I've used Highland ladder bars (Pep Boys) and other flat lip base type bars. The key is running some securing bolts/screws through the plastic rain gutter into the roof itself on either side of the base clamps. The plastic rain gutter is just clipped to the car, and it needs reinforcement. Especially if you plan on tossing a canoe or kayak up there. There is a proper metal rain gutter under the plastic. Screwing anything into the roof is not needed Quote Link to comment Share on other sites More sharing options...
Subaru Scott Posted July 11, 2017 Share Posted July 11, 2017 (edited) Here's the setup I did on my XT: Wallyworld basket, 99 bucks. Could have probably found one cheaper, but it was convenient. Cradled in hardware store handles that I bent the feet on to match the roofline. Fastened down with stainless bolts into crimp-in threaded stainless inserts from Northern Tool, where I got the insert tool from as well. Didn't have to remove or butcher the headliner either. Stainless hose clamps hold it down, and it's incredibly strong. Add a hitch-mounted basket on the back, and who needs a truck? Edited July 11, 2017 by Subaru Scott 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.