Jump to content
Ultimate Subaru Message Board

gaskets needed for hg on ej25 '03


Recommended Posts

Any advice for ej novice intending to do the leaky hg on 2003 Fox 2.5 sohc I think it is?

Timing belts been done. What other parts required hg rocker gaskets? Intake and exhaust I'm sure

Any fiddly ones to order like an ea82 and its can box o rings

Genuine part numbers be handy too if you can. Any preferred trusted suppliers of after market?

Link to comment
Share on other sites

Get a free FSM online to follow along

 

Resurface the heads. GD has a good thread about DIY

 

Turbo Subaru gasket part number ending in 770

 

Valve cover, exhaust, intake gaskets - subaru or decent aftermarket.

 

Cam seals, crank seal, oil pump oring, i always use Subaru on these, but can't say if it matters.

Link to comment
Share on other sites

The full Subaru Part Number for the Turbo Gasket is 11044AA770.  This is a Multi-Layer Steel gasket and is the preferred one for most non dealer shops they usually use what is specified/superseded by VIN number.

 

I used them on my EJ20 head installation and they work great!

Link to comment
Share on other sites

Thanks for the info it will be helpful. Gotta say my local dealer uses genuine on ej with new bolts and not need retention. I have found same using quality genuine hg on me ea82s. Even though I check tension they never take any.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...