sirtokesalot Posted August 20, 2017 Share Posted August 20, 2017 will the fuel level sensor and pump assembly from the 2002 outback work in a 1998 outback? my pump is technically fine but the level sender is malfunctioning causing a p0463 engine light code. Quote Link to comment Share on other sites More sharing options...
Mike104 Posted August 21, 2017 Share Posted August 21, 2017 Check at http://opposedforces/parts for your car then check the where used option and it will show if they are interchangable Quote Link to comment Share on other sites More sharing options...
idosubaru Posted August 21, 2017 Share Posted August 21, 2017 No. 00+ changed. Should be a dime a dozen though to get the right one: www.car-part.com That will also be a good starting point for interchangeability. Also to verify yourself - google image search and look at bolt pattern and electrical connectors. Quote Link to comment Share on other sites More sharing options...
sirtokesalot Posted August 23, 2017 Author Share Posted August 23, 2017 i wasent too worried about the connectors i could solder new wires if needed the part i wanted to use was the level sensor. does it work the same way and could it be adapted to fit on my current pump assembly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.