Jump to content
Ultimate Subaru Message Board

Recommended Posts

Putting 06 Impreza heads back together. When cam plate is torqued the cam shaft wont turn. Must have switched a cam shaft or cam plate. The #s one the cam  plates is DS-07011A and the other one is 70-070110B. Don't see any #s on cam shafts. Is that enough information  to sort  out which cam and cam plate goes together, or is it back to the machine shop.

Link to comment
Share on other sites

Cams are easy. Left side cam is longer.

 

Plates aren't any different side to side but they are line bored on the head so they have to be on the correct head for the bores to match. Remove the cams bolt the cam plate down and check the seams inside the bores where the two meet. If it's the wrong plate there will be a ledge on at least one of the bores where the halves aren't lined up. If that's the case, swap the plates and recheck.

Link to comment
Share on other sites

there should be 2 letters stamped at the edge of the heads, and on each cam case.  might need to wipe with brake cleaner....should be on the top edge of the heads and cases

 

like "NX" or "WN"

 

match the letters on each head to the appropriate cradle.

  • Like 1
Link to comment
Share on other sites

Okay The cams and cam plates are in the correct head.Thank you guys for guiding me thru the process. Have new problem though. When I torque the rocker arms assemblies to 18 ft.lbs. The cam shaft is moving freely. The front exhaust  rocker arm gets stuck on the assemble and wont rotate . The rear exhaust rocker and front and rear intake rockers seem to move freely. Torqued down the torques  plus and Allen head  bolts and now all rockers are moving freely on rocker arms, but the cam shaft is turning hard, Must be overlooking something simple.

Edited by steve56
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...