Nusube86 Posted March 3, 2018 Share Posted March 3, 2018 I bought a descent early '86 carbed gl wagon that someone put an '89 spfi ea82 into. I have an ecu (22611 aa392 -42) but no connector or ecu side wiring. Engine wiring is intact. I cannot find a pinout diagram anywhere! 10,18,24 pin plugs. Any information? Quote Link to comment Share on other sites More sharing options...
Gloyale Posted March 5, 2018 Share Posted March 5, 2018 (edited) Way too much work. Just slap a carb manifold on it and a Weber if you have too. Although I've had good luck resealing and clearing out the clogged passagess on the hitachis, they work fine. Just no point in swapping unless you also have a High pressure Fuel pump, MAF, air intake and Air cleaner, and a harness. You would need to strip a full harness from a donor SPFI car. Edited March 6, 2018 by Gloyale Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 6, 2018 Share Posted March 6, 2018 Weber. Better performance and much simpler. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.