Jump to content
Ultimate Subaru Message Board

which wax/polish for your subie?


Recommended Posts

Guest jclay

happened to be in an auto parts store today, and after seeing all the different brands on the shelf, wondered what you all used, and with what results.

 

 

jared

Link to comment
Share on other sites

Make sure you get a real one...heh. I tried the 'spray as you dry' stuff and it does not work well at all. I use normal ole' Turtle Wax in the little tub. It is decent and cheap. I want to try some of the Meguiars wax...it seems like it'd work well, but its double the cost of Turtle Wax.

Link to comment
Share on other sites

Still looking for a good wax/polish, tried Nu Finish, and something 3000 came in a green bottle, would not recommend either. both left white residue that I kept finding in areas I could not buff well months after application.

 

Good luck

Link to comment
Share on other sites

zymol japon. It's about 30 bucks. You can get it at www.emmonscoachworks.com

 

It's not the easiest to put on, and once or twice a year, you should apply zymol's HD Cleanse on the surface.

 

This is not the same zymol you can get at a parts store, and like I mentioned....it's not exactly the easiest or shortest wax job you'll do. The results however are pretty amazing.

 

Here's a few pics of my car after waxing

 

http://www.main.experiencetherave.com:8080/subaru/images/zymol

http://www.main.experiencetherave.com:8080/subaru/images/legacyzymol

Link to comment
Share on other sites

Autoglym! Have been using their products for the last fifteen years and I still haven't seen anything that combines the ease of application to the perfectly controlled results. I even use the "Car Glass Polish" on my apartment windows and mirrors, too. No other product cleans glass so well, with so little effort and no streaks or smears.

Paintwork polished in "Super Resin Polish" and sealed with "Extra Gloss Protection" has a surface like Rain-X treated glass.

 

http://www.autoglym.co.uk/index2.html

 

 

Rain-X has glass treatment cornered, by the way.

Link to comment
Share on other sites

I use Meguiars Gold Classic, goes on easy and comes off easy. A good coat of this and some times I use just a bucket of water and sponge to clean vehicle the next time. Use Blue Coral car soap and no more than it takes to clean vehicle. Two coats of wax on front leading edges help in high speed impact bug removal.

Link to comment
Share on other sites

Consumer Reports actually did a test of car waxes in 2000. They tested for gloss, ease of application, cleaning, durabilitity, and scratching/hazing:

 

"For a moderately weathered finish, 3M One Step Cleaner Wax 39006 liquid is the clear choice for its cleaning ability--that is, if you don't mind waxing more often. Its durability was only fair. It costs about $6.45 for a 16-ounce bottle. For a badly oxidized finish, you may need to start off with a polishing compound, available at auto-parts, discount, and department stores.

 

If a shiny finish is your paramount concern, first consider Zymöl Cleaner Wax liquid and Nu Finish Car Polish paste. But be prepared to make some compromises. The cleaning ability of both products was so-so, and Zymöl's durability was just middling. Also, the Nu Finish tended to scratch or haze somewhat, a problem especially with dark-colored cars. The Zymöl is also quite expensive, at $16 a pint. The Nu Finish costs about $6.20 for a 14-ounce can.

 

Among the high-rated polishes, the Prestone Bullet Wax, about $7.25, and Armor All Car Wax, about $5.55, lasted the longest. But neither one quite matched the gloss that the Zymöl and Nu Finish paste produced. The Armor All scratched or hazed more than most.

 

A convenient applicator made Prestone Bullet Wax easier to apply than any of the other liquids and pastes we tested. Although spray polishes win hands down for ease of use, they aren't effective on cars with a very dirty or oxidized finish. And be prepared to do the job often; the durability of the sprays we tested was no better than fair. Of the three sprays, Turtle Wax Express Shine Spray Car Wax performed the best overall. "

 

I use Nu Finish, which cleans OK, is quite durable, and is extremely easy to use, being a liquid.

 

The wash & wax products don't seem to work at all, including the car wash versions. No polish lasts more than about a month, they say.

Link to comment
Share on other sites

Guest Vickaroo

Should I use a buffer on my new 2005 RS???? Tim said NO cause it will ruin the paint???? I say hes wrong cause I beleive thats what the guys use at the dealership when detailing.... Does anyone use a buffer on your new Subarus??? Vicky

Link to comment
Share on other sites

All I want is ease of application and removal, and the ability to help keep road gunk and bugs from permanently imbedding into the paint. On our older car I've been very happy with Mother's Cleaner Wax Liquid. On our newer one, I've been using Rain-X liquid wax and then I use their Fast-Wax after each wash. These seem to work great. I really like the Rain-X stuff, it seems to keep the car cleaner longer.

 

Some of my friends who have collector cars, love the pricey Zymol stuff like Legacy777 recommended.

Link to comment
Share on other sites

I've been reading about,(but never tried), the clay bar method. Several wax companies sell Clay Bars which you use to rub down the paint. They're completely non-abrasive when used properly,(with lubricant), and according to most of the reviews I've read, do an amazing job. You follow the clay bar rub-down with a regular wax job.

Link to comment
Share on other sites

I've used clay bars, and honestly, don't care for them. They make more of a mess then they help, and I've got some polishing compounds that leave the surface much smoother.

 

Clay bars are however pretty decent in removing overspray though.

Link to comment
Share on other sites

zymol is good stuff. smells good too:)

 

I used to use Ibiz but its a order only deal and I never plan that far ahead. I only get the urge to wax my car(s) every once in a while and its real easy to go get the zymol from the parts store.

 

Ibiz was really good on black cars. I dont know why but it worked. no swirlys.

Link to comment
Share on other sites

Armor-All Car Wash Concentrate in that Mr. Clean dealie. It's about $5 for a half gallon bottle whereas the Mr. Clean soap is about $6 for a pint and a half. It works just the same (has the anti-streak formulation and everything), and I like the convenience of the device.

 

I have had nice results from the Eagle One Wax-As-You-Dry, but it's not quite as simple and quick as they claim it to be. I think if you follow their directions, you can get a somewhat dull finish. If you put some elbow grease into the "as-you-dry" part, it does a fine job.

Link to comment
Share on other sites

Sooooooo Matt, are you willing to stake the price of an Obsidian pearl Black paint job on this???? There is no way I would use a powered buffer on this thing. First problem is it will leave "swirls", secondly, you run the chance of burning the paint if your not very careful. I'll spend the time and hand buff with a soft flannel towel. Later, Tim

 

A buffer would be fine. Don't use like steel wool on it..heh. But make sure it has a nice and soft buffing thing on the buffer (like flannal or the soft baby diper kind)

 

That shouldn't harm your paint.

Link to comment
Share on other sites

Weeellll...

 

When I used the buffer thing with the soft shameoi cloth on the Legacy it seemed to not leave swirl marks. I prefer using soft flannel/baby diapers when I wax the OBW...it seems to go a lot faster than the buffer...but the buffer seemed to leave a nicer shine.

 

I might be wrong and the buffer might mess up paint...but my experience has been on cars with some scratchs and dings and I just wanted to get the wax job done, but did not notice any more scratches when I was done.

Link to comment
Share on other sites

Sooooooo Matt, are you willing to stake the price of an Obsidian pearl Black paint job on this???? There is no way I would use a powered buffer on this thing. First problem is it will leave "swirls", secondly, you run the chance of burning the paint if your not very careful. I'll spend the time and hand buff with a soft flannel towel. Later, Tim

There is a good chance that you will leave swirl marks and/or burn the paint if you are not carefull using a buffer. But as far as I know, the swirl marks come when dirt or "particles" are trapped in the "cloth," so make sure your car is clean and use a clean soft cloth. The burning comes when you press down on the buffer, don't keep the buffer moving, or a buffer which spins too fast. But I've also seen swirl marks on cars that have been hand applied- so pick your poison.

 

Is you dont want to risk your obsidian pearl paint (and who could blame you), do what I did, practice on your wife's car.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...