camilleh Posted July 19, 2004 Share Posted July 19, 2004 I have a oil pump leak on my 1998 subaru 2.5l outback. I have taken it apart three times. The first time I replace the o-ring and gasket. I used a high temp silicon gasket. It still leaked. I'm pretty sure it is leaking around the bottom bolts close to the o ring because there is no oil residue above these bolts. I took it apart again and used an anaerobic gasket and it is still leaking. I think the gasket might be failing inside near the o ring. I'm wondering if there is some other type of gasket material I should use. Or if I should put something on the bolts. Thanks in advance!! Quote Link to comment Share on other sites More sharing options...
theotherskip Posted July 19, 2004 Share Posted July 19, 2004 subaru recommends permatex ultra-grey #599: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.