ferret Posted July 23, 2004 Share Posted July 23, 2004 Just came across this. Have seen a few here who have had problems with their clocks...$43.99 shipping included .... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2481381076&category=33673 Quote Link to comment Share on other sites More sharing options...
Dr. RX Posted July 23, 2004 Share Posted July 23, 2004 Gee, at 1st Subaru Parts, it only costs $39.78, but then you'll need to add shipping, for me that would probably be less then the $4.00 difference. I need a clock for my Impreza, but I don't think this one would work, as I don't see anywhere that I could fit it. Quote Link to comment Share on other sites More sharing options...
Sweet82 Posted July 23, 2004 Share Posted July 23, 2004 Ouch! I had problems with my clock but $43 bucks for a new one?????? Using the fix outlined by board members, I had my old clock ticking in about 15 minutes. Either, I'm cheap or that clock is expensive? Glenn 82 SubaruHummer still has orignal clock 01 Forester still has re-soldered orignal clock Quote Link to comment Share on other sites More sharing options...
tacode Posted July 23, 2004 Share Posted July 23, 2004 Ouch! I had problems with my clock but $43 bucks for a new one?????? Using the fix outlined by board members, I had my old clock ticking in about 15 minutes. Either, I'm cheap or that clock is expensive? Glenn 82 SubaruHummer still has orignal clock 01 Forester still has re-soldered orignal clock I always thought the overhead clock was kind of useless, considering there's a clock on the radio as well. If I were to spend $35 to $43 bucks on a replacement, it would have to be a lot more than just a clock! Anyone ever replace it with something like an outside temp guage, trip computer, compass, etc? Quote Link to comment Share on other sites More sharing options...
The Dude Posted July 23, 2004 Share Posted July 23, 2004 Using the fix outlined by board members, I had my old clock ticking in about 15 minutes. Glenn The clock is out on my Forester. What was the repair you refer to? I have power (12 volts) at the connector, but the clock module seems to be dead. Thanks Quote Link to comment Share on other sites More sharing options...
Sweet82 Posted July 23, 2004 Share Posted July 23, 2004 Lemme do some digging...... I think I did a post, whinning about "clock issues". Do a search for those key words. The responses I got were 100% accurate even to the exact chip that needed a "booster" soldering. The guys here had this problem nailed. I'm gonna go get lunch, if you havn't found it in an hour or so I'll get you the link, when I get food in me:D Hungry, Glenn 82 SubaruHummer with original clock 01 Forester with repaired original clock Quote Link to comment Share on other sites More sharing options...
Sweet82 Posted July 23, 2004 Share Posted July 23, 2004 I'm full now:grin: Try this see if it helps you..... http://www.ultimatesubaru.org/forum/showthread.php?t=14124&highlight=clock+issues Good luck, Glenn 82 SubaruHummer 01 Forester Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.