Jump to content
Ultimate Subaru Message Board

Recommended Posts

bump

 

 

this is a wild guess, but if the mirror is on the door, wouldn't pulling the door panel expose the wiring and mounting hardware to the mirror?

Link to comment
Share on other sites

Start by removing the small panel on the inside of the door opposite the mirror. There should be a couple of 10mm bolts that hold the mirror on. Track the wire which will have a harness to release. If the wire goes behind the door panel, you will need to remove it to detach/attach the new wire. This is a VERY easy operation. The hardest part (which is not very hard) is to remove/install the door panel if necessary. Give a shout if you have any problems.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...