hammer008 Posted September 20, 2004 Share Posted September 20, 2004 I am now pumping my air struts manually with a cheap $10 bicycle air compressor because of a bad ECU/compressor for the air suspension. My only question is how high should I be pumping the struts. Now I have about 7 inches from the top of the rim and the ride seems ok. But I want to set it to factory settings. Could someone be so kind as to measure their factory heights and let me know. I would be greatly gratified. ps..I have lots of gmail accounts...let me know if you want one. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted September 20, 2004 Share Posted September 20, 2004 I'll do one better....give you the factory spec info http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/wheel_arch_meas_1990.jpg Quote Link to comment Share on other sites More sharing options...
hammer008 Posted September 20, 2004 Author Share Posted September 20, 2004 I'll do one better....give you the factory spec info http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/wheel_arch_meas_1990.jpg THANK YOU LEGACY777. My of gratitude goes to you. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted September 20, 2004 Share Posted September 20, 2004 THANK YOU LEGACY777. My of gratitude goes to you. welcome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.