Guest jclay Posted October 2, 2004 Share Posted October 2, 2004 Hi all, I need your help, i've developed what i think is a fuel issue. Fairly regularly, and within the last week, while going doen the road, i'll be going smoothly, then the rpm's drop drasticly, and it kind of feels like i'm out of gas briefly, then it gets itself going again. I've changed the fuel filter, and added fuel system cleaner, which made it better briefly, now its getting steadily worse. Fuel Pump? Clogged injectors? I will add its a 94 Legacy Wagon, with around 250K Miles. Please respond quickly, i really need to get this thing taken care of before Monday. Thanks in advance, Jared Quote Link to comment Share on other sites More sharing options...
friendly_jacek Posted October 2, 2004 Share Posted October 2, 2004 I had similar symptoms with TPS problems (bad connection) in 2000 legacy, but MIL and AT temp lights went of and codes pointed to TPS. Quote Link to comment Share on other sites More sharing options...
Guest jclay Posted October 3, 2004 Share Posted October 3, 2004 Thanks, I'll try to check it out, unfortunately my Check Engine Light has burned out, so i am unable to pull codes, AAARGGGHHH!jared Quote Link to comment Share on other sites More sharing options...
Cougar Posted October 3, 2004 Share Posted October 3, 2004 It very well could be the pump is going out. You may want to check the fuel pressure before changing the pump to verify the suspected part. Quote Link to comment Share on other sites More sharing options...
Surfdougyfresh Posted October 4, 2004 Share Posted October 4, 2004 I had a similar problem on my 8cyl. '95 Jeep Grand Cherokee. Cleaning out the throttle body helped for a while, but after a couple months I'd have to pull it off for another cleaning... Quote Link to comment Share on other sites More sharing options...
Guest jclay Posted October 4, 2004 Share Posted October 4, 2004 How does one check fuel pressure? also what are the signs of failing fuel pumps?thanks, jared Quote Link to comment Share on other sites More sharing options...
cannonball Posted October 4, 2004 Share Posted October 4, 2004 Thanks, I'll try to check it out, unfortunately my Check Engine Light has burned out, so i am unable to pull codes, AAARGGGHHH!jared I may be wrong, but a burnt out CEL shouldn't mean you can't get a reading. It just means the light is gone. Quote Link to comment Share on other sites More sharing options...
MorganM Posted October 4, 2004 Share Posted October 4, 2004 How does one check fuel pressure? also what are the signs of failing fuel pumps?thanks, jared Nab yourself a cheap fuel pressure guage. They come in a little kit. Pretty cheap as far as these kinds of tools go. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted October 5, 2004 Share Posted October 5, 2004 First thing I'd suggest is replace the CEL bulb. You could be spitting in the wind and going a completely wrong direction. If the ECU can give you some info on where to look, why not use it. My suggestion would be to check your MAF sensor. I had a very intermittant problem for over a year where I'd be driving along on the freeway and the car would just lose power. I'd put it in neutral and rev the engine to bring it back. Most of the time that would work. Some times it didn't. Also if I was just driving around town or low rpms, the car would usually just stall. Quote Link to comment Share on other sites More sharing options...
Tiny Clark Posted October 5, 2004 Share Posted October 5, 2004 Cannonball, Older models require the use of the CEL to flash and give up codes that way. They don't have a diagnostic test jack like OBDII vehicles have. Quote Link to comment Share on other sites More sharing options...
frag Posted October 5, 2004 Share Posted October 5, 2004 Cannonball, Older models require the use of the CEL to flash and give up codes that way. They don't have a diagnostic test jack like OBDII vehicles have. On my former Loyale the flashing light was not the CEL but was on the ECU box. Is this different with the first gen Legacy? Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted October 5, 2004 Share Posted October 5, 2004 On my former Loyale the flashing light was not the CEL but was on the ECU box. Is this different with the first gen Legacy? The 90 & 91 MY legacies had a flashing light on on the ECU, as well as the CEL in the dash. The 92-94 MY's did not have the light on the ECU, just the dash. Quote Link to comment Share on other sites More sharing options...
Guest jclay Posted October 5, 2004 Share Posted October 5, 2004 yes, only the CEL for code reading, although i have a plan to fix that, the fuel pump will go long before that light repair happens. also see my new thread, fuel pump symtoms and repair...thanks everybody Quote Link to comment Share on other sites More sharing options...
Cougar Posted October 5, 2004 Share Posted October 5, 2004 If you find the CEL light is really good but the light still doesn't work let me know. I have seen the IC go bad in the ECU that drives the light. The circuit makes a ground for the light when it is turned on. There is a replacement chip available to fix it. Quote Link to comment Share on other sites More sharing options...
Guest jclay Posted October 6, 2004 Share Posted October 6, 2004 thanks cougar, i'll keep that in mind, but i think the light is merely burned out, after being on for months due to a bad IAC valve. getting behind the dash to replace the light seems complicated, so heres my plan...i'll go to the JY, find the identical black male/female connectors used to pull codes w/ the CEL, trace the wires back as far as possible, and clip with as much length as possible. use these new leads as extensions by clipping them to thier corresponding connectors in my car, then wire in a new bulb and switch from radio shack, and, if all goes right, be able to pull codes with the touch of a button. ( i know this got away from the topic of this thread, but feedback anyway?) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.