Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Posted 13 December 2002 - 07:07 AM
My first attempt was to use my dremel to clean the motor contacts, as the arc pitting was pretty bad. Worked fine as far as cleaning, but hard to keep the bevel angle they have on the contacts and the disc. I took just a hair more off of one contact, and the starter didn't work. I ended up shimmimg up one of contacts.
Tip one: For the contacts, take them completely out to clean them up. Just make sure you get the insulators back in properly.
Tip two: For the disc, I put the shaft into my drill press, then cleaned it up with sandpaper as it was spinning. This makes for a nice even job.
Once the contacts are back in, I checked the contacts out to make sure they'd work before putting the rest of the starter back together. I used an old headlamp bulb and some jumper cables.
Posted 13 December 2002 - 08:18 AM
I'll sticky and archive when activity on the thread stops.
Posted 13 December 2002 - 09:11 AM
I bought all of that before realizing that it was the clutch pedal switch that was faulty.
So it's there waiting for later on...
Posted 16 December 2002 - 01:41 AM
Posted 19 December 2002 - 09:39 AM
Posted 19 December 2002 - 11:12 AM
You know it's that when you turn the key and it only goes "click". When it does nothing, it is usually the clutch pedal switch or, more rarely, the starter relay.
According to the guy who sold me the contacts and the plunger, the brushes almost never have to be replaced : this motor is not spinning very often...
The only other thing, I think, that can go bad, is the pinion (the part engaging the flywheel). I would presume that this is also an easy replace. When this part goes, either the starter spins freely and the engine does'nt turn or it makes an horrendous grinding sound.
Maybe someone with more experience will correct and/or complete.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users