scrapdaddytatum Posted November 5, 2004 Share Posted November 5, 2004 i have a 95 l impreza 2.2 awd, i have put wrx brakes on all around, is there a better master cylinder to use, the 01 rs has the same bore so its no improvement, i dont know if i can use wrx one, does anybody know how to get better pedal feel and more front bias out of the brakes?????? also my steering rack is shot, is there a better one that will fit with a quiker ratio to it, is an rs rack better, will it fit, does anybody know these answers??? email me at tatum@adelphia.net thanks also im still looking for rs hood, f/bumper cover and beam, hood hinges, and 97+ headlights, and gt rims cheers Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted November 5, 2004 Share Posted November 5, 2004 Do you have ABS or no abs? If you don't have abs, the only upgraded MC you can use is from a 94-96ish FWD SVX w/o abs. If you have ABS you can use a 1 1/16 bore MC from a first gen legacy....in fact I think I have one. For better pedal feel you can upgrade to the single diaphragm brake booster. Why do you want more front bias. The WRX brakes should add HUGE amounts of front bias. You should be able to lock the fronts up at will. If not, I'd say you still have air in the system or possibly some other issues. Yeah I'd look at an rs rack or some newer ones. I know for the early legacies, some guys have gotten racks from the 97 gt's and they fit in, and provide better ratio and feel. Quote Link to comment Share on other sites More sharing options...
scrapdaddytatum Posted November 5, 2004 Author Share Posted November 5, 2004 cool than i be looking for a svx master, napa wants 150, ill try the yards Quote Link to comment Share on other sites More sharing options...
cookie Posted November 5, 2004 Share Posted November 5, 2004 proportioning valve. Any good race supply shop will have them. When you start messing about with brakes you often end up with a bias one way or the other. The factory will have worked weeks on setting up the original system for a proper bias and when we fit other componants we must compensate. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted November 6, 2004 Share Posted November 6, 2004 adj prop. valves will not work on a stock brake system. The stock system uses a dual diagonal brake system. In case one circuit fails, the other is there to stop you. The only way to use an adjustable prop valve is to replumb the brake lines going to the rear to a single circuit. Quote Link to comment Share on other sites More sharing options...
cookie Posted November 8, 2004 Share Posted November 8, 2004 One for ech side. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted November 8, 2004 Share Posted November 8, 2004 You'll never get both valves exactly the same, and because of this, you'd be causing an even more dangerous situation by having different braking forces on each side of the car. Quote Link to comment Share on other sites More sharing options...
cookie Posted November 8, 2004 Share Posted November 8, 2004 this is why race cars usually replumb. In reality often leaving the stock brake and changing pads and maybe rotors is best. Quote Link to comment Share on other sites More sharing options...
scrapdaddytatum Posted November 9, 2004 Author Share Posted November 9, 2004 ok so i used a 94 svx(2wheel. no abs) master cylinder and a wrx proportining valve, and now i got insane brakes, all this is on wrx brakes all round with ebc green stuff pads all around, im also using brembo cross drilled rotors all round too, the pedal travel is about 1/2 inch total, with lockup only happening with wheel skip on bumps, the rump roast end isnt locking up early anymore Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted November 9, 2004 Share Posted November 9, 2004 The proportioning valves are different between the abs & non-abs cars. You should really try and find a prop valve from a non-abs car. What the ramafications are for using the abs one on a non-abs car......I'm not sure. Quote Link to comment Share on other sites More sharing options...
scrapdaddytatum Posted November 9, 2004 Author Share Posted November 9, 2004 used jdm 01 wrx non abs vavle, dont ask me how i got it, but it works perfect Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted November 9, 2004 Share Posted November 9, 2004 ok....so you used a non-abs jdm valve....not a usdm one. Quote Link to comment Share on other sites More sharing options...
scrapdaddytatum Posted November 9, 2004 Author Share Posted November 9, 2004 right worked great too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.