SubeeTed Posted November 19, 2004 Share Posted November 19, 2004 Hi ALL ! My rear rotors and pads needed replacing. I'de like to do them myself. I found the steps here easy to follow, so, for the first time I'de like to save a few bucks and do them myself! I have an 1997 GT Legacy Wgn. 2.5 DOHC. So the questions is.................I've heard for years that ONLY use OEM Subee pads!! The logic being.....they don't sqeak!!! IS this TRUE? Or rumor!? If rumor....what are a decent set of pads for regular driving?? Rotors..............I've seen them on Ebay. Brembo's? Don't they make the OEM rotors for Subee? Any good???? If not, what to get??? Many, Many Thanks......SubeeTed Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted November 19, 2004 Share Posted November 19, 2004 You can use pads other then OEM and not have squeaking issues. It's true that some aftermarket pads do squeak. So decent pads are axxis metal master and ultimates. There's a few others, but with the rear pads they don't do much braking anyway. As for rotors, most of the brembro rotors you see are just going to be in brembro boxes, and not actually be manufactured by brembro. I personally like OEM rotors....but that's just my opinion. Quote Link to comment Share on other sites More sharing options...
applegump Posted November 19, 2004 Share Posted November 19, 2004 I would also stick with OEM rotors (not that expensive if bought at the right place, eg Liberty Subaru ) and I would definately recommend Axxis pads. I've got the Deluxe Plus which are showing practically no wear, the bite is great, and they are quiet but any(Original Deluxe, Deluxe Plus, Metal Master, and Ultimate) Axxis pads are gonna be great. BTW the job is even easier than you would expect! Quote Link to comment Share on other sites More sharing options...
Strakes Posted November 19, 2004 Share Posted November 19, 2004 I'm using Axxis/PBR Metal Masters right now and love them. I've used their "Deluxe" and liked them a lot also. The Deluxes were the best at putting out the least amount of dust. The metal masters put out more dust. No squeaks or squeals on either the Metal Masters or the Deluxes. Quote Link to comment Share on other sites More sharing options...
Setright Posted November 19, 2004 Share Posted November 19, 2004 I used "Brembo" discs when I did the rears on my old Legacy. Perfect fit, fine quality. If they are cheaper, get them. I would stick with OE pads though. The last long and don't give any trouble. Front pads are more relevant to experiment with. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.