Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
96 gt 2.5 to 2.2 swap difficulties
Posted 09 December 2004 - 01:20 AM
i'm doing the work myself and have decent experience, but have had a few hang ups on some rusty, stubborn bolts.
first, the bottom drivers side bolt that attaches the transaxle to the engine came off at the nut with difficulty and is pretty rounded. can i get a new nut from subaru or should i go to a junk yard and try and find a matching 14mm nut?
the whole bolt and nut on the pass. side came out and my new engine has both bolts on the bottom, so i'm not sure how to get the nut off the old but because it is so rusty.
and worst of all, after finally pulling the engine... while removing the 8 bolts that hold on the plate that attaches the crankshaft to the flywheel i rounded the head of a bolt. i was stupidly using a crappy socket and now its rounded bad and won't come off. i suppose i could get a new plate somewhere to put on the new engine, but again i will need find a replacement bolt. Is there anyway to get off a rounded head
lastly, any recommendations on how to 'break it in'? i'll be strict about oil changes and such, but am curious about how i should limit how hi it's revved or what not. this is my first 'new' rebuilt engine i've been able to swap to a dead car.
i swapped my toyota pickup v6 for a lower mileage engine a few years back.
i appreciate the forum and help[/font]
Posted 09 December 2004 - 11:42 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users