Jump to content
Ultimate Subaru Message Board

95 CD Player into 90 Legacy??


Recommended Posts

Anybody know if it's possible to make a 95 CD player work in a 90 Legacy, the one with the aux jack. CD player is installed, connectors from cd fit into radio, however there is a two wire plug coming out of the cd player but I can only find a single wire plug in any of the under dash wiring. CD goes in but no sound or lights. CD self ejects after several seconds. I cut and saved the two wire connector from the under dash side of the donor car. Any suggestions?

Link to comment
Share on other sites

Please visit www.the12volt.com and take the time to register. It is fast and free. There you will find a ton of answers to your question. Most likely you will find someone who has already done the swap.

 

You could also go to you local bestbuy and purchase the Aftermarket wiring harness for your car and then get the wiring code for the 95's off the12volt or from someone on here.

 

Hope this helps.

Link to comment
Share on other sites

Please visit www.the12volt.com and take the time to register. It is fast and free. There you will find a ton of answers to your question. Most likely you will find someone who has already done the swap.

 

You could also go to you local bestbuy and purchase the Aftermarket wiring harness for your car and then get the wiring code for the 95's off the12volt or from someone on here.

 

Hope this helps.

Thanks for the tips. No success yet but working on it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...