mackryan Posted December 12, 2004 Share Posted December 12, 2004 as above its a 96 legacy gtb wagon. anyone know this? Quote Link to comment Share on other sites More sharing options...
ShawnW Posted December 12, 2004 Share Posted December 12, 2004 Is the check engine light on? If so a code is stored that can be removed with an ODBII reader, provided non USA models have ODBII. Quote Link to comment Share on other sites More sharing options...
rottenhead Posted December 12, 2004 Share Posted December 12, 2004 My '92 Legacy does this as well. On mine, it coincided with a code of 24 after doing the "handshake" procedure on Josh's site (http://www.surrealmirage.com/subaru/trans.html) which indicates something wrong with the duty C solenoid. Either way, I think it means something is amiss with the transmission or related electronics. My power light started flashing a few months before I began to get torque bind. Not sure if it's directly related...but it's definitely not something to be put off. Quote Link to comment Share on other sites More sharing options...
NOMAD327 Posted December 13, 2004 Share Posted December 13, 2004 My kids 98 would blink 16 times on every start and it was the duty c solenoid. On 96 there may be a need to replace tailhousing while it's apart. Problem is steel bearing running against aluminum. In 98 or 99 the tailhousing was redesigned with a steel insert to prolong life, So there may be a failure related to that piece as well. Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted December 13, 2004 Share Posted December 13, 2004 Yeah, there's a code stored in the TCM. I'm not sure if the procedure to get the codes on my site will work with your car, but you could give it a try. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.