Jump to content
Ultimate Subaru Message Board

2000 OBW > can't program new remote > no horn chirp


Recommended Posts

bought a used 2000 OBW that didn't have the remote with it. bought one & tried to program. i also can't tell if it has the subaru security system. when the car is off the security light flashes, but i can't find an alarm horn nor do the key/lock sequences cause the alarm to arm/disarm/horn chirp. i'm thinking the security light is set to flash as a dummy when no alarm is present, but i'm not sure? back to the remote, i can't get the horn to chirp once to enable program mode. is a subaru oem key needed as i only have an aftermarket key? my roomate has a 2001 OBW and so i have the technique down pat. i can get his into program mode every time! my car just won't go into program mode. any ideas? think the sucurity light is causing the problem? think i have additional wiring/control unit problems? key causing the problem? anyway to reset? no other electical issues have been found. where is the security system control/horn if i would have one?

thanks :-)

bill

Link to comment
Share on other sites

got it to work. guess my on & off key technique/timing. needed to be slightly different for my car. thanks!

 

 

 

bought a used 2000 OBW that didn't have the remote with it. bought one & tried to program. i also can't tell if it has the subaru security system. when the car is off the security light flashes, but i can't find an alarm horn nor do the key/lock sequences cause the alarm to arm/disarm/horn chirp. i'm thinking the security light is set to flash as a dummy when no alarm is present, but i'm not sure? back to the remote, i can't get the horn to chirp once to enable program mode. is a subaru oem key needed as i only have an aftermarket key? my roomate has a 2001 OBW and so i have the technique down pat. i can get his into program mode every time! my car just won't go into program mode. any ideas? think the sucurity light is causing the problem? think i have additional wiring/control unit problems? key causing the problem? anyway to reset? no other electical issues have been found. where is the security system control/horn if i would have one?

thanks :-)

bill

Link to comment
Share on other sites

I've had something weird with my Forester's security system. I can't seem to get it off of what the manual calls "valet mode". All it does is chirp the horn when it locks/unlocks, but it doesn't really activate the alarm. I'd like it to, because in my school's parking lot, cars are prone to vandalism and burglary, and it's not like I can be hiding behind a tree all day waiting to push the panic button.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...