Stigs Posted February 21, 2005 Share Posted February 21, 2005 I'm installing some aftermarket speakers today in my Legacy. I want to put them in the back, but from what I can tell, I have to take off the rear dash/deck to do so. How do I do this without breaking the rear dash? I've looked at all the possibilities so far, but nothing has worked yet. Thanks for any help you can give. Quote Link to comment Share on other sites More sharing options...
legacy91 Posted February 22, 2005 Share Posted February 22, 2005 In my 91 legacy I needed to pop off the speaker cover right behind the rear seat, the speaker was directly under that. Quote Link to comment Share on other sites More sharing options...
97subaruGT Posted February 22, 2005 Share Posted February 22, 2005 It's pretty easy. Remove two bolts for the rear seat, it's by your feet, on the bottom. Pull out the rear seat. Slide up the back rest and unhinge from the two loops on each side. Pull out the speaker cover (could be painful) and you're done. Quote Link to comment Share on other sites More sharing options...
Stigs Posted February 22, 2005 Author Share Posted February 22, 2005 Thanks, I'll try it! Quote Link to comment Share on other sites More sharing options...
Brett_j Posted February 22, 2005 Share Posted February 22, 2005 Dont make the same mistake I did and cut the fabric,just cut the board arround the perforated edges. I now have 2 ugly holes in the fabric where my speakers are. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.