Jump to content
Ultimate Subaru Message Board

Remanufactured CV axle quality?


Recommended Posts

My front right CV axle has been getting noisy (or could it be the wheel bearing?). Most of the drivetrain components have 125k miles on them.

Can anyone comment on the quality of CCT or any other brand of axle? AutoZone will sell me a lifetime supply of CCT's (fits all four sides) for $65.

Link to comment
Share on other sites

If they've got a warranty I'd say go for it.

 

As far as rebuilt axles go, the quality varies. I had a bad experience once when I bought one from NAPA. Seems they forgot to put grease in the outer joint. That cut down the longevity of the axle a wee bit. Then they tried to weasel out of warranteeing it because I had taken the boot off in order to verify that there was no grease in there. Sorry for the rant.

Link to comment
Share on other sites

Stay away..no, RUN away from ARI axles. Most of the NAPA stores around here sell that brand, pure junk. You'll recognize them by the bluish-green label on the box.

 

I agree with Ed (above), the CVO axles have been great:) .

Link to comment
Share on other sites

Stay away..no, RUN away from ARI axles. Most of the NAPA stores around here sell that brand, pure junk. You'll recognize them by the bluish-green label on the box.

 

and the noise they make after you install them.............sheeesh what were they thinking???

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...