There is a slight difference in length on Hydro Lifter Pushrods versus Non hydro lifter Rods.....
Also If you have a Hydro block it has Hydro lifters in the bottom at the cam that those pushrods Work with....
If you happen to stick the Loger rods into a Shaved Non hydro Block you could bend Push rods or Valves Possibly....
You can use Non hydro Heads and Pushrods on a Hydro Block, But you need to keep the non- Hydro Components Together....
I had the opposite Problem on my last Built Motor from CCR I sent them a Hydro Block, and Kept all my Pushrods and Rockers here.....I got back a Non hydro Block accidently, with Non hydro Lifters...I put the thing together , and Had ZERO Compression ......???? Due to the fact that the Lifters/pushrods were keeping the valve train open
I had to adjust My Rockers out a Bunch to get it to work.....And change Pushrods out For non hydro Ones......
Hope this Clears it a bit for you......
Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Guest Message by DevFuse
EA81T to MPFI EA81 :)
25 replies to this topic
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users