Rossta86 Posted August 31, 2003 Share Posted August 31, 2003 Do i need to get the old wheel bearing pressed out and the new one pressed in the steering knuckle. Or is there a way i can do it at home my self? Thanks Quote Link to comment Share on other sites More sharing options...
stephenw22 Posted August 31, 2003 Share Posted August 31, 2003 you can tap the bearings out yourself using a punch and hammer. You can also tap the new ones in, very carefully, hitting only on the outer race, and being careful not to scrape the bearing face on the knuckle. It's good as well if you use a brass punch instead of a steel one. Just slowly work your way around the bearing, and take your time using light taps with the hammer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.