Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
91' Loyale No Power when I turn the Ignition????????
Posted 15 April 2005 - 12:54 AM
Posted 15 April 2005 - 09:01 AM
Also, there was another thread on here somewhere with a very similar problem and I think all the experienced soobie wizards were pointing in the same direction.
Posted 15 April 2005 - 10:25 AM
Posted 15 April 2005 - 10:30 AM
Posted 15 April 2005 - 11:34 AM
The ignition switch is next in line if things are ok with the links. Another thing to look at is the neutral safety switch if you have an automatic. You can try starting it in neutral if that is a problem.
You should also clean the battery terminals, especially the smaller positive wire, and look for signs of internal corrosion of the wire.
Posted 15 April 2005 - 11:51 AM
Posted 15 April 2005 - 01:09 PM
Posted 15 April 2005 - 01:14 PM
also check the wires at the back of hte alternator to see if they energize and to see if there is continuity from the pwer lead to the battery
with the key on, these fuses should have power on both sides.
i fried something in my car installing a radio, and the ecu had no power, because i accidentally grounded out the green wire to the radio(hot at all times) i was a moment away from tearing out the dash until i jumped a wire from the battery to the green wire, and behold i had power to the ecu and the car runs now. this is temporary till i sort thru the wiring harness.
check for 12 volts at the green wire. if its not present you can try what i did, at your own risk
Posted 15 April 2005 - 04:17 PM
Have you checked fuse #5 for the power problem? I think that is the source for your problem.
Posted 15 April 2005 - 04:48 PM
Posted 15 April 2005 - 08:28 PM
Posted 15 April 2005 - 09:00 PM
Posted 15 April 2005 - 09:13 PM
You need to see if voltage is getting to the solenoid on the small wire tied to it. This wire is suppossed to turn on the solenoid. If you have an automatic try starting it in the neutral position. If that works, then you need to check the neutral safety switch.
Posted 15 April 2005 - 10:42 PM
Thanks for all the help!!!! I hitched a ride back to eagle where my car was acting UP armed with a new ignition swith and my probe. Turns out my ignition harness fell out of its link. Simple as that!! 2 min fix.
Thanks for helping a new guy out.
Posted 16 April 2005 - 07:24 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users