Jump to content
Ultimate Subaru Message Board

ecu location..how to check codes


Recommended Posts

The ECU is located behind a steel panal, under the carpet, on the passenger side. Toward the front of the floor.

 

It is most likely OBD1, but I have a late 1995 Impreza L, that is indeed OBD2. Depends on the manufacture date. If there is a small plug connector under the lower left side of the dash, it's OBD2. (It's behind a little door)

 

Todd

Link to comment
Share on other sites

The ECU is located behind a steel panal, under the carpet, on the passenger side. Toward the front of the floor.

 

It is most likely OBD1, but I have a late 1995 Impreza L, that is indeed OBD2. Depends on the manufacture date. If there is a small plug connector under the lower left side of the dash, it's OBD2. (It's behind a little door)

 

Todd

Correct call Todd, my 95 Legacy wagon is OBD2 also. On a side note, in you list of cars, you show a 95 Impreza L 2.2 AWD but don't show it as an auto tranny, I though all 2.2s up to 97 were autos in Imprezas.
Link to comment
Share on other sites

DR RX Yes, my Impreza is automatic.

 

Now as for codes...if you have the plug and are OBD2, you need a code reader. Many parts stores will read this code for free. (AutoZone/Orielys, ect)

 

If you are OBD1, you have to connect wires under the dash and look for the sequence of flashes on the dash. (I'm not an expert on OBD1s, so I hope the board members will add to this.)

 

Todd

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...