Jump to content
Ultimate Subaru Message Board

Noisy 22T-new oil pump or just reseal???


Recommended Posts

I have a lot of experience with the EA82T oil pumps but none with the newer T...Can I simply reseal this pump or does it need replaced? I have noisy (very) lifters. Other than that seams to run fine, no smoking, missing or hesitation. 1992 Legacy Sport EJ22T, 150K miles.

thanks

Link to comment
Share on other sites

You can remove the oil pump, replace the o-ring and reseal it. You can also remove the backing plate and check that the clearences between the rotors are within spec.If that is good.....you probably need to replace the lifters. They may have been gummed up due to infrequent oil changes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...