Jerry DeMoss Posted July 7, 2005 Share Posted July 7, 2005 I was wondering if anyone has had first had experience with a head swap on the EJ22T.I have heard of using heads of '97-'01 Dohc and sohc 2.5rs.I have also heard of using heads off of mid '90's model jdm wrx.I have read a bit on fitment as well as the resulting cr. I was wondering if there are any issues anyone has come across with valve timing,and what timing belt to use? I am asuming that I would use the T belt from a 2.5rs,and the head gasket from the EJ22t. I have been looking at forged pistons as well for the swap.I have not purchased the car I am contemplating this with,but I have been looking at the '94 Legacy turbo as a good starting point for a rally car. I appreciate any input. Quote Link to comment Share on other sites More sharing options...
All_talk Posted July 7, 2005 Share Posted July 7, 2005 Hey Jerry There are a few here that know a bit about the swap and you can get some good info, but to get the full scoop from those who have done it go over to LegacyCentral and do some searching. http://bbs.legacycentral.org/ Also search around the NASIOC board. http://forums.nasioc.com/forums/ Gary Quote Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted July 7, 2005 Author Share Posted July 7, 2005 thanks man I will check that out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.