Meeky Moose Posted September 15, 2003 Share Posted September 15, 2003 ok, i have an 86 gl-10 turbo wagon.. i need to replace the mid section of pipe. this has the catalytic convertor attached to it... from what i can tell, my exhaust bolts together in 3 pieces.. what i was wondering is, will the mid section off another turbo soob fit , if it was off an XT or RX for example.. were the ehxaust systems the same? I really need to figure this out since the car is due for inspection next month. if i keep rackin my head over this i might end up lookin like this banana Quote Link to comment Share on other sites More sharing options...
MilesFox Posted September 15, 2003 Share Posted September 15, 2003 from the ypipe/downpipe back, the exhausts will bolt the same. the only difference is 2wd and 4wd, as the 2wd pipes are closer to the trans tunnel, and will rub agsinst the drivedhaft near the gear lever. the back part(from the flange to the muffler) will clear a 4wd axle Quote Link to comment Share on other sites More sharing options...
Meeky Moose Posted September 15, 2003 Author Share Posted September 15, 2003 exactly what i needed to know... your a genious so i just need to find a midpipe off a 2wd turbo soob Quote Link to comment Share on other sites More sharing options...
MilesFox Posted September 15, 2003 Share Posted September 15, 2003 yeah, subarus are like legos. i know from what i have tried. you can use the mid pipe of ANY 2wd soob, stick or auto, wagon,sedan, or 3door! you can also use a ANY 4wd pipe on a 2wd, but not the other way around Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.