gyuunuuya Posted July 19, 2005 Share Posted July 19, 2005 Hey everyone, Ok my car is a 92 Subaru legacy wagon AWD non turbo. I bought the thing for 600 bucks and love subaru's now. Quick up to date 1) Transfer case has seized clutches so when front wheels spin 1:1 ratio backs do to. (Not very fun when your turning) So I took out a piece of the driveshaft and now am running in 2WD mode. Yes I tried putting the fuse in the FWD mode and it doesn't work. 2) 2 weeks ago I bought 4 brand new sumitomo tires 3) 3 days ago I got a 4 wheel alignment by a retard at Evans tires that was tring to loosen my rear adjuster and was tightening it instead, which made him strip the bolt head. 4) I went up to L.A. and back today from San diego and looked at my tires. front right and rear right tires r wearing fast on outside tread and inside on the other 2. 5) Also when the guy was doing my alignment which he said all the tires adjusted correctly except my right rear tire which is at -35 degrees, cuz he said it couldn't be adjusted any more then that. Do I need to go get an alignment again or is something else wrong???????? I don't want to spend 400 dollars on tires every 3 months. I rememberr some tech at big O tires said something about caster or something and they couldn't adjust it. Anyways any help would be awesome and thanks in advance Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted July 20, 2005 Share Posted July 20, 2005 Go back and complain, or go somewhere else to get an alignment. Did you mean -3.5 deg or -35 deg? If it's -35 deg, that's got to be wrong....your tire would be leaning at that angle. More then likely, this guy had no clue how to use the alignment machine. They probably got it all messed up. Quote Link to comment Share on other sites More sharing options...
gyuunuuya Posted July 20, 2005 Author Share Posted July 20, 2005 Go back and complain, or go somewhere else to get an alignment. Did you mean -3.5 deg or -35 deg? If it's -35 deg, that's got to be wrong....your tire would be leaning at that angle. More then likely, this guy had no clue how to use the alignment machine. They probably got it all messed up. Sorry come to think of it. I was off neg 0.35 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.