Jump to content
Ultimate Subaru Message Board

Recommended Posts

Hello everyone this is my first post here. I have a 93 Legacy awd auto that is slipping in reverse, it shifts fine in the forward gears. I have searched the forums and read about brake band adjustment. I was wondering if adjusting this band would possibly improve the reverse problem. The trans has 172K on it and is due a fluid change. Thanks for any and all help that is offered.

Link to comment
Share on other sites

Try manual first gear, if it slips there, it is the low/reverse band or clutch (Must use manual first, since in drive first it uses a one-way clutch instead of a band for first gear) if it does not slip there but slips in third gear, then it is the high-reverse band/clutch (I say band or clutch since some transmissions use a multifriction clutch and others use a band. If I remember correctly, at least on the three speed, the low/reverse is a band and the intermediate is a multi-friction clutch.)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...