Jump to content
Ultimate Subaru Message Board

Recommended Posts

My Hazard lights on my 97 Outback wagon have never worked. But my directionals do work. But when the Hazard switch is in the on position my directionals wont work. Any thoughts? I checked all the fuses and they seem to be fine. Thanks guys:)

Link to comment
Share on other sites

My Hazard lights on my 97 Outback wagon have never worked. But my directionals do work. But when the Hazard switch is in the on position my directionals wont work. Any thoughts? I checked all the fuses and they seem to be fine. Thanks guys:)

 

I want to be sure I understand what you wrote: "when the Hazard switch is in the on position my directionals wont work" (and they should not). But do your hazard lamps work when the turn signals are off ?

Link to comment
Share on other sites

I want to be sure I understand what you wrote: "when the Hazard switch is in the on position my directionals wont work" (and they should not). But do your hazard lamps work when the turn signals are off ?

 

No, my hazard lamps do not work when the turn signals are off. They have never worked as long as I have owned the car. I am thinking its a bad switch possibly?

Link to comment
Share on other sites

No, my hazard lamps do not work when the turn signals are off. They have never worked as long as I have owned the car. I am thinking its a bad switch possibly?

 

Has anybody ever pulled off the center dash A/C register/trim panel for any reason---like maybe to replace bulbs in the A/C mode control? (I'm wondering if the hazard switch connector is simply disconnected). If the bulb in the hazard switch is still working (these cars eat dash lamp and switch illumination bulbs) the hazard switch should illuminate at night when the headlamps are on. So if the hazard switch does not illuminate, it could be disconnected, or the bulb may simply be burned out.

Link to comment
Share on other sites

Has anybody ever pulled off the center dash A/C register/trim panel for any reason---like maybe to replace bulbs in the A/C mode control? (I'm wondering if the hazard switch connector is simply disconnected). If the bulb in the hazard switch is still working (these cars eat dash lamp and switch illumination bulbs) the hazard switch should illuminate at night when the headlamps are on. So if the hazard switch does not illuminate, it could be disconnected, or the bulb may simply be burned out.

 

Well the switch doesnt illuminate at night, so lets say the switch is disconnected would the dash need to be pulled to replace it? Or is it as simple as popping out the current switch for a new one? Thanks for the help....

Link to comment
Share on other sites

The fact that you stated that the turn signals stopped working when you pushed the switch in makes me think the switch connection is ok. I would suspect the flasher unit as the problem.

 

Hmmm so where is this flasher unit that you speak of located? :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...