Jump to content
Ultimate Subaru Message Board

Rear anti-sway bar


Recommended Posts

I found a RX in the junkyard today, and grabbed the LSD. It's a different ratio than my GL-10 diff, but I'm sure I can find a home for it.

 

The RX had a rear anti-sway bar. Anybody know if this will fit my GL-10 wagon? It looks like I'd have to do a bit of welding to attach it to the control arms, but that's no problem. It's a pretty skinny bar - is it worth my time?

Link to comment
Share on other sites

Ummm. not sure about that Caboobaroo

 

I have ONLY seen one GL-10 that had the tab mounts for the rear sway bar. If you have the mounting tabs then yes it is a direct bolt on. I had to take off the rear passenger tire to get my bar on though.

 

Since I didn't have the mounting tabs I had to use the trailing arms from an RX. The only other way is to weld the tabs on.

 

I totally agree the sway bar will make it handle better. Less body roll.

Link to comment
Share on other sites

I have ONLY seen one GL-10 that had the tab mounts for the rear sway bar. If you have the mounting tabs then yes it is a direct bolt on.

 

I agree.. I have only seen one GL-10 with the rear bar as well.. Thankfully, I happen to own that one:D

 

Use the RX trailing arms and it becomes a bolt on accessory

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...