SubaruImpreza_Power Posted September 30, 2003 Share Posted September 30, 2003 the question is will it fit and turn? http://www.partsamerica.com/PartDetails.asp?SourceArea=SHOP&SourcePage=SEARCHRESULTS&MfrCode=ALT&MfrPartNumber=010326&CategoryCode=3411S Quote Link to comment Share on other sites More sharing options...
theotherskip Posted September 30, 2003 Share Posted September 30, 2003 i doubt it. you are better off with a 3" extenstion, u-joint, and 12" extension... Quote Link to comment Share on other sites More sharing options...
North Ursalia Posted September 30, 2003 Share Posted September 30, 2003 Snap On (I know... $$$) makes a spark plug tool that fits into the spark plug tube and leaves about an inch sticking out of the tube (ie: just enough clearance to get a ratchet in there). The end that sticks out is knurled so after you start with a ratchet you can finish with just your hand. It's great for starting the plugs back into the sockets- makes it damn near impossible to crossthread them. Quote Link to comment Share on other sites More sharing options...
SubaruImpreza_Power Posted September 30, 2003 Author Share Posted September 30, 2003 man the Dohc is a pain in the neck.. I tell you what I did.. I used a 6" extenstion on the drivers side and a 3" on the passenger side with a Flex hard rachet. I bet I could of used the 3" ext. on the drivers side too but I was not sure.. But I tried the 6" Ext. on the passenger side and it was a no go with the airbox in the way.. getting some tools for myself this weekend. Quote Link to comment Share on other sites More sharing options...
99obw Posted September 30, 2003 Share Posted September 30, 2003 I like to wrap my swivel(u-joint) with electrical tape to make it less swively. It makes a nice short extension. I like to work from underneath with the mud guards removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.