xforxlifex Posted October 1, 2003 Share Posted October 1, 2003 Has anyone done this to an ea82t yet? if so how difficult is the job? And i know id have to dispose of the freeon, or whatever it is these days. Quote Link to comment Share on other sites More sharing options...
reoff Posted October 1, 2003 Share Posted October 1, 2003 How hard could it be? Just have the system evacuated by a licensed shop and start removing all the parts. I like my A/C, but have "modified" it a bit so I can control when it works. Otherwise, rip it out and sell the parts. Rich Quote Link to comment Share on other sites More sharing options...
xforxlifex Posted October 1, 2003 Author Share Posted October 1, 2003 Well i can evacuate it myself i have access to a machine im just wondering about belts. Quote Link to comment Share on other sites More sharing options...
reoff Posted October 1, 2003 Share Posted October 1, 2003 Just have to play with sizes a bit. Shouldn't be too bad. Quote Link to comment Share on other sites More sharing options...
TomRhere Posted October 1, 2003 Share Posted October 1, 2003 My '82 has the EA-82 engine in it. Had A/C on the engine. Compressor mounted in-board of the Altenator. No P/S either. Belt used for waterpump and altenator is a Goodyear Gatorback 15411. Hope this helps..... Quote Link to comment Share on other sites More sharing options...
soobme Posted October 1, 2003 Share Posted October 1, 2003 Uhhhhhh.......sorry to hi-jack but, I really really need one of the little square Hitachi AC compressors that mounts in-board of the Alt. in most mountings. Do either of U guys have one U want to part with? And on the removal, I have pulled all but the compressor its self out of my EA82T, and now it runs 15* cooler than it did before. Geting that big AC rad. out of the way of the water rad. is one of the best things I did to my car. Quote Link to comment Share on other sites More sharing options...
reoff Posted October 1, 2003 Share Posted October 1, 2003 There is something wrong with this picture... ask yourself why your car is running cooler without the condenser... is there something wrong with your cooling system? In Oregon, you should rarely need to use the A/C. When it isn't being used, there should really be no difference. Was it clogged with dirt/leaves/bugs? Anyway... this isn't all that important anyway. I just always need to know why things are happening. xforxlifex - Good luck with the removal, although I doubt you'll need it. Rich Quote Link to comment Share on other sites More sharing options...
rallyruss Posted October 1, 2003 Share Posted October 1, 2003 I removed the A/C from the R/X recently. not to bad a job but you do need to pull the radiator to get the condenser out and the compressor is easyer to get off with the fan clutch out. good time to do T. belts too. I am only running a single belt now but will be looking for a shorty to go around the p.s. and w.p. good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.