Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Posted 02 October 2003 - 06:25 PM
Which diff is it that locks? What are the advantages? Why arent you guys swapping this into your hopped up brats and hatches?
Also, could you get diff lock with the DR?
Posted 02 October 2003 - 06:32 PM
Posted 02 October 2003 - 06:42 PM
Posted 02 October 2003 - 06:51 PM
let me get this straight,
the diff locking mechanism is in the tranny?
So if you have a car that came with a locking diff but not dual range, you cant just swap in any dr tranny and keep the original locker?
I'm am just rying to make sure I follow you. This sounds alot different from lockers on Jeeps and other trucks.
Posted 02 October 2003 - 07:14 PM
Hopped up Brats, Hatch's Wagons... Any 4speed or 5 speed 4WD tranny have no center diff's, they use a different type of mechanism to create the 4WD when engaged, and that mechanism act's like a locked diff at all times (when 4WD is activated).
You cannot take a Single Range 5spd with diff lock and convert it to Dual Range. 1987+ Subaru RX's are the only model that came with Dual Range Full Time 4WD Transmissions with a Center Diff lock.
Honestly, I wouldnt want to do any heavy off-road use with a Full Time 4WD tranny because it still has an open center diff, and if the diff lock malfunctions, your going to be set back using an open center diff.
Posted 02 October 2003 - 07:20 PM
Posted 02 October 2003 - 07:25 PM
Something i've been pondering, because if I get this GL10 TurboWagon sold, i'll probably have to drive it to deliver it. I was thinking of removing both rear CV's in order to drive it. Since it has miss-matching tires, i dont want to blow the tranny with the FT4WD.
Posted 02 October 2003 - 07:25 PM
"Diff Locks only come on Full Time 4WD 5 speed Transmissions"
I belive the automatic (4EAT) FT4wd also had diff lock switches
Please correct me if I am all wet.
Posted 02 October 2003 - 07:27 PM
Posted 02 October 2003 - 08:08 PM
I have a 4 spd, D/R works flawslessly......(82 GLW)
If i need SUPER traction I throw the luv lever..50/50 split right?..schwing!!
I also have a 5spd, full time 4wd w/ ctr locker (from 87+ RX) and it's 3.7 LSD..........sitting on the shelf (along w/ all the custom bits to make it fit my wagon = drive line and axles..)
why would I want to put the conversion in.........
I need convincing that it's actually better (relaible?)
trying to learn here too before I go thru the transplant hassle only to wish I didn't
82 GLW (lots of mods )
Posted 02 October 2003 - 08:19 PM
you mean weld the gears together so they wont slip?
Posted 02 October 2003 - 08:23 PM
With the LSD and the center diff locked you will have three (3) wheel drive.
Plus in some nasty situations where the car may get out of hand before you can grab and shift the lever the FT4wd may keep you out of trouble.
Plus who wouldn't want a ten (10) speed in their car (The RX tranny can be shifted hi/lo/hi at any time, your wagon can not go into low at any appreciable speed.)
Note the low range is not as low as yours (numerically).
Please email me if your decide to sell the set up rather than instal it.
Jack, Sfly is no doubt talking about welding the spider gears in the rear diff, turning it into a permantly locked diff - not a good choice if you want to drive it on dry paved roads, in my op.
Posted 02 October 2003 - 08:45 PM
Posted 02 October 2003 - 09:19 PM
I'll keep ya'll posted,
contemplating what to do with a stash of parts :eh:
after putting on the suspension, seats, and brakes...WOW!
craving power et al.......
82 GLW Snow White
Posted 02 October 2003 - 09:25 PM
Posted 02 October 2003 - 09:32 PM
but oh my, what a difference w/ the KYBs............and real seats.
Posted 02 October 2003 - 09:34 PM
When are we going to race? We can meet up at that track in Fairfield. I need tires, but thats about it... oh, and a rear sway bar and a webbah.
Posted 02 October 2003 - 09:39 PM
Posted 02 October 2003 - 11:49 PM
As far as the locking feature goes.. you wouldn't have to enable it at all as long as you wouldn't mind not being able to lock it up.. i still haven't matched up the wiring harnesses yet in my car; all it means is that i can't enable the locking center differential. it also means i don't have reverse lights so i have to be extra careful
If you want to enable the locking center differential, it would be simple. Go find a single range push button 4wd car at the JY and grab the vacuum actuator deal in the corner by the driver's strut tower. It has green plastic parts on it. Get the vacuum lines it sends to that transmission (they'll hook to your RX transmission in a similar fashion) and get at least both sides of its wiring connection(s). If you have the switch for the locking diff for your RX transmission you can use that once you get the wiring installed, or you can use the switch in the shifter for the same car you get the vacuum actuator from.
The RX uses the same type of vacuum actuator as the single range push button 4wd cars, the difference in the switch is that there's a power and a ground for a light in the RX's diff switch.
Most of what you'd be looking at besides the transmission interchange ( i think your car is an EA81?) is the wiring-in-the-vacuum-actuator issue.. shouldn't be too hard.
Posted 03 October 2003 - 10:57 AM
I do have the vacuum unit (working?!)from the doner project and an RX ctr Dif switch (very neato, I'll be just like the new STIs) and the schematic diagram.........just have to learn to read the bugger.
it's sounding simpler all the time. seems like I'll be giving up a Lil' Low Range 4wd capabilitiy but w/ the ctr dif lock it seems to even out.......?!
just might have to complete this science project a bit sooner
I'll keep ya posted
82 GLW (losta mods)
Posted 03 October 2003 - 06:48 PM
with a locked diff, you have power to one ot the other wheel in front, and one or the other wheel in back, and both must turn at the same rate. when oppen, you have power to one or the other in front, and one or the other in back, baut are allowed to turn at different rates.
the lsd will make it one wheel up front and both in back.
Jack:you woul;d have to take apart both trannies to swap the electric lock into a 5spd from an rx, but i dont know squat about taking a tranny apart!
Posted 03 October 2003 - 07:31 PM
Posted 04 October 2003 - 11:56 AM
put a fuse in therer for front wheel driv.
check that out first!
Posted 04 October 2003 - 01:21 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users