subeman90 Posted January 3, 2006 Share Posted January 3, 2006 Tip: Shifter Linkage SlopFix #1: Better results can be gotten by slicing the outer sleeve horizontally from the open end, to just past the hole area, then drilling out the inner rod so that the holes are similar sized, then putting a bolt through and tightening it down and squeezing the outer sleeve to the inner rod. http://www.indysworld.com/80s/general/USRM/mick-usrm/ea81-shifter-fix/EA81ShifterFix.htmlAbove submitted by Hassey 1 Link to comment Share on other sites More sharing options...
Recommended Posts