Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Adventures in Overheat Land
Posted 21 April 2006 - 09:29 PM
So I called AAA and got a tow truck, and only had to wait twenty minutes for it to arrive. The tow driver asked if my car was AWD. I said no, it's 4WD. So he jacks up the back end, with the front wheels on ground. We are in the truck ready to go when I ask:
"By the way, why are you towing from the back"?
He says "Well on 4WD cars the front wheels are free when the transmition is in 2WD mode":eek:.
I then tell him that 4WD Subies and most other cars that have 4WD are normaly Front Wheel Drive when not in FWD. You would think a tow trunk driver would know these things :-\.
Tow Guy then gets out of the truck and attaches a set of jacked wheels to Murph's front wheels. I'm sure there would not have been damage to the transaxle if the car rolled home on the front wheels, 4 1/2 miles away, but I'm glad that we didn't do it regardless.
So the lesson here is: Make sure you check that Tow Guys, or mechanics for that matter, know about your Subies.
PS. Got the car home, hopped in the work truck, and went to Kragen Auto for the hose. I decided to get the lower hose too since I'm under the hood getting dirty. I also replaced the temp sensor to see if the bizzaro digi gauge temp readings would normalize (turn fan or headlights on and watch the thing spike). I replace the parts, put water in the rad, and Murph started right up . Today, while driving around, the check engine light was on for a while, but is off now. I think an electrical connection to a sensor might have still been moist, but I'll keep an eye on it.
PPS. The other lesson learned: When you change the head gaskets on your car, as I did a month ago, you should replace the radiator hoses, and any other coolant hoses, since you already have them off the engine!
PPPPS. Didn't I learn that lesson already???
Posted 21 April 2006 - 10:08 PM
You'll want to check for any play in the water pump. Mine was run long enough that it fried the water pump, but thankfully, nothing else. I also had a slight 'hum' afterwards which was fixed with a new water pump.
The temp gauge weirdness is probably a bad ground(s) somewhere.
Posted 22 April 2006 - 12:47 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users