trooperjeep Posted November 5, 2003 Share Posted November 5, 2003 Hi All, I finally got some digital pics of my 92 Subaru Loyale, auto, 4WD that my daughter loves to call “Suba-Doo” as she is a big Scooby-Doo fan. Keep in mind that this car was trashed by my ex-wife and (thanks to all your help) it took me only a month to restore it. I’ve enclosed the pics in 3 separate posts: Modifications: K&N air filter Air-box, drilled NGK plugs Napa high-discharge wires 2nd Cat-Converter removed Roof Mount Rally lights Fog lights Firestone Fire Hawk Indy 500 tires Water-proofed (silicone sealed) electrical connectors Homemade Parts: Skid-plates (front, oil-pan, & mid-exhaust) Timing belt cover, oil-drip collector Padded push bar Sub-Frame connectors TV/VCR center (for the kids) T.J. Quote Link to comment Share on other sites More sharing options...
trooperjeep Posted November 5, 2003 Author Share Posted November 5, 2003 2nd photo... Quote Link to comment Share on other sites More sharing options...
trooperjeep Posted November 5, 2003 Author Share Posted November 5, 2003 3rd photo... Quote Link to comment Share on other sites More sharing options...
mummer43 Posted November 5, 2003 Share Posted November 5, 2003 Nice car!! I don't see any rust. Quote Link to comment Share on other sites More sharing options...
trooperjeep Posted November 5, 2003 Author Share Posted November 5, 2003 Nope... no rust. I fixed it all. Waterproof Marine Grade Fiberglass Quote Link to comment Share on other sites More sharing options...
calebz Posted November 5, 2003 Share Posted November 5, 2003 Looks good.. I dig the push bar and the paint scheme! Quote Link to comment Share on other sites More sharing options...
the_bard Posted November 5, 2003 Share Posted November 5, 2003 I second that... I love the Outback-ish look you've got with the black trim. If'n I remember right from another thread, that was done using underbody coating, right? That's going on my list of projects when I get that new Subaru... Quote Link to comment Share on other sites More sharing options...
trooperjeep Posted November 5, 2003 Author Share Posted November 5, 2003 T.J.'s Painting Tips... After the typical rust fixing, fiberglass, and body filler stuff... Get some 1/4" painter’s masking tape (not the low-tack junk) and mask off the edges of all the areas to be painted. You can follow the contours of the wheel arches and create the smooth curves if you take your time. Next, use regular masking tape, ½ overlap the ¼” tape and cover most of the car with newspaper. Lightly sand the surfaces then prime it with an "adhesion promoter” spray in a can, which helps the top-coat of paint stick better. Use the "truck bed liner in a can" spray. Do 3 coats to slowly build up the surface texture so it is about 2/16" thick. When it is all dry (over night) finished the edges with 1/8" black pin striping to overlap where the black meets the white. It gives it a crisp edge and professional look. T.J. :santa: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.