Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Automatic seatbelt fuse location
Posted 09 October 2006 - 02:54 PM
Searched for automatic seatbelts fuse here, didn't find it, but did manage to find out myself.
The fuse is located in the fuse box with the rest of them, but it isn't labeled belts, or auto belts. Its in the top row of fuses, 5th from the left and is labeled
Mine stopped working remaining in the forward position whether doors open or closed etc. Immediately started working after fuse was replaced.
I think it would be easy to overlook not only because it isn't labeled, but I didn't notice hazards and horn weren't working and my clock is digi and not hooked into that fuse.
Posted 24 January 2012 - 05:40 PM
At least on my car, this fuse isn't the only one for the auto belts.
I found that with the fuse removed, it made the belts automatically power themselves to the rear position. My rear limit switch must have been a bit sticky, as the motor buzzed a bit (with the belt all the way back) before it decided it was done.
So if you're looking to *fix* your auto belts, definitely check this fuse, but note that there is at least one other fuse somewhere.
And if you're looking to *disable* the auto belts, the same applies- there is more to it than this, and it might not solve anything if your rear limit switches (or their wiring) are flaky or non-functional.
Posted 20 March 2017 - 11:34 AM
Hit a big puddle offroad yesterday and now my power windows, power seatbelts and turn signals are all inoperable. The lights will still flash when i press the hazard button. I did not check this fuse however, as my horn and clock still work...has anyone had this problem before? I was almost wondering if my ignition switch might be an issue as the components that no longer work all run off key on power.
Posted 20 March 2017 - 12:07 PM
In my 94 Loyale wagon the Auto seatbelts were removed but the control module was still causing a significant drain on the battery I could pull the horn,clock,hazard fuse and the drain would go away but I wouldn't have horn, clock, or hazard so I just unplugged the module and i haven't had an issue since. The module is located behind the rear plastic trim behind/above the wheel well.
Posted 20 March 2017 - 12:37 PM
Interesting...if all else fails i may put power to the motors, get my belts to go to the locked position and then unplug that module. Did that fuse affect your power windows at all?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users