Scott in Bellingham Posted January 8, 2007 Share Posted January 8, 2007 I got my 30x9.50 Kooks and now I need some fender flares what should I go with? any ideas or pics , its on a EA82 with 6" lift needs a little trimmin thanks Quote Link to comment Share on other sites More sharing options...
Jibs Posted January 9, 2007 Share Posted January 9, 2007 Bushwhacker Samurai flares, they have the gas door cutout and all. Will prolly be a close fit to our soobs. Or you could use that garden edging... Quote Link to comment Share on other sites More sharing options...
BlueSteel Posted January 9, 2007 Share Posted January 9, 2007 http://www.pickupspecialties.com/Flexy_flares.htm the 2 1/4" should be about the right size for 30's depending on offset mine were 50mm and work a treat heres an idea can sorta see what the width is like here.. bad pix i know... but they were pulled of a vid camera Quote Link to comment Share on other sites More sharing options...
Turbone Posted January 10, 2007 Share Posted January 10, 2007 Or you could go the cheap, redneck route and use garden edging like me. Quote Link to comment Share on other sites More sharing options...
monstaru Posted January 10, 2007 Share Posted January 10, 2007 jeep cherokee......... Quote Link to comment Share on other sites More sharing options...
El Toro Posted January 10, 2007 Share Posted January 10, 2007 i used some from a vw jetta. ill get pick tomorrow Quote Link to comment Share on other sites More sharing options...
Sweet82 Posted January 10, 2007 Share Posted January 10, 2007 Or you could go the cheap, redneck route and use garden edging like me. Whatever works! I think it's a great idea. Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 10, 2007 Author Share Posted January 10, 2007 Personally, I think it's kind of sweet having loads of rubber hanging out the side...I mean, aside from the obvious law-breakage, it's kind of cool. Your mud-flingability factor goes waaaay up. Im not to interested in getting a ticket, will have to check out that garden edgeing Quote Link to comment Share on other sites More sharing options...
Turbone Posted January 10, 2007 Share Posted January 10, 2007 Home Despot, I think it was about $17 for 25ft. Quote Link to comment Share on other sites More sharing options...
Rooinater Posted January 11, 2007 Share Posted January 11, 2007 that's probably what i'll be using on lil' roo when i move back to washington... cheap garden edging... down here they don't really care... and same with the yota. but i'm going to have to figure a way to remove it while on the trail. some sort of quick release. Quote Link to comment Share on other sites More sharing options...
esh Posted January 14, 2007 Share Posted January 14, 2007 http://subaruesh.spaces.live.com/photos/ Quote Link to comment Share on other sites More sharing options...
crazy D Posted January 18, 2007 Share Posted January 18, 2007 http://subaruesh.spaces.live.com/photos/ those are nice....what they made of? Quote Link to comment Share on other sites More sharing options...
Turbone Posted January 19, 2007 Share Posted January 19, 2007 It looks like....................................................garden edging:rolleyes: Quote Link to comment Share on other sites More sharing options...
Phizinza Posted January 19, 2007 Share Posted January 19, 2007 It looks like....................................................garden edging:rolleyes: Looks more like the proper 4WD flairing rubber with wire insert to me (don't know if you US guys get that stuff..) Quote Link to comment Share on other sites More sharing options...
esh Posted January 19, 2007 Share Posted January 19, 2007 [ATTACH]4597[/ATTACH] those are nice....what they made of? they are proper 4wd flaring. you can get them by the metter at rubber shops. thes ones without wire insert. I also added another strip of plain rubber to widden the mud flaps cause I like the stock ones Quote Link to comment Share on other sites More sharing options...
chef_tim Posted January 19, 2007 Share Posted January 19, 2007 Looks more like the proper 4WD flairing rubber with wire insert to me (don't know if you US guys get that stuff..) That's what i have on my hatch.......... Just need to make sure you get it screwed in to solid metal. Later, Tim Quote Link to comment Share on other sites More sharing options...
Turbone Posted January 20, 2007 Share Posted January 20, 2007 Where did you get yours Tim? Does it really come in a roll? Ok for your tires, but that wouldnt work for mine. Quote Link to comment Share on other sites More sharing options...
chef_tim Posted January 20, 2007 Share Posted January 20, 2007 ^^^I picked it up at a custom truck parts shop, it was four individual strips and I just put it on and cut to where I wanted it to end on the bottems. The wire is very tough, I broke my favorite dykes on it. Ended up using a cut off wheel:headbang: Quote Link to comment Share on other sites More sharing options...
El Toro Posted January 31, 2007 Share Posted January 31, 2007 damn only took forever to get these posted... they are off of a jetta Quote Link to comment Share on other sites More sharing options...
Phizinza Posted February 1, 2007 Share Posted February 1, 2007 damn only took forever to get these posted...they are off of a jetta Looks pretty good. Nice and clean Quote Link to comment Share on other sites More sharing options...
quazar Posted February 1, 2007 Share Posted February 1, 2007 VW Mk2 Jetta.. 1986-1989? Quote Link to comment Share on other sites More sharing options...
El Toro Posted February 1, 2007 Share Posted February 1, 2007 VW Mk2 Jetta.. 1986-1989? yah in that range mine came off of a 84 like this Quote Link to comment Share on other sites More sharing options...
Turbone Posted February 2, 2007 Share Posted February 2, 2007 Now something like that would look sweet on my RX:brow: Quote Link to comment Share on other sites More sharing options...
Rooinater Posted February 2, 2007 Share Posted February 2, 2007 i'll have to go with what rob has when i move back or risk the ticket. cause mine stick out over 4 inches... :-\ Quote Link to comment Share on other sites More sharing options...
El Toro Posted February 2, 2007 Share Posted February 2, 2007 4in DANG! sound like garden edge is the way for you. and yes they would look good on a rx! i had to use a dremel to modify the edge around the door and around the lower trim but over all they work great Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.