MaroonDuneDoom Posted November 19, 2003 Share Posted November 19, 2003 i need to lower my driver's seat a few inches to make it more anatomically friendly as i am about 6'3''. the angle on my foot is killing me. does anyone have any bright ideas? i was just asking because i haven't ever checked out the bottom of a soob seat. i know i'll have a little fab work to do, but i was wondering if someone can picture what i'm saying and give me some tips on how to get the bastard down a couple/few inches. "many tanks"-hussein Quote Link to comment Share on other sites More sharing options...
biffbradford Posted November 19, 2003 Share Posted November 19, 2003 I'm 6'5" and feel your pain, man. I drive an '87 XT and a '92 Legacy wagon and have the seats slid back, steering wheel tilted up, and the seats pretty much upright although some tilt back on the seat will gain you some headroom. I feel pretty comfy, my head does touch the headliner a little, but not badly. I always wanted to try some club type racing, but there is no way to drive with a helmet unless they allow me to have the helmet sticking out of the sunroof ! Perhaps if you take out the seat, make some custom brackets and bolt the seat right to the floor. Clean, quick, and permanent ! jw milwaukee Quote Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted November 19, 2003 Author Share Posted November 19, 2003 yeah, i think thats what i'l do. i'll find a way to modify the brackets so that i can lower it a couple inches and still be able to move it up if my girly wants to do some wheelin. i'll post pics if i ever get it done. Quote Link to comment Share on other sites More sharing options...
WagonsOnly Posted November 20, 2003 Share Posted November 20, 2003 Put in GL-10 or XT6 seats, cut the brackets and that wayyou'll be able to raise the seat back to "normal" for other drivers, with minimal fuss. Quote Link to comment Share on other sites More sharing options...
whiplash-smile Posted November 22, 2003 Share Posted November 22, 2003 Since I also am 6'5, I put in some 2003 WRX seats hoping to quit losing scalp on my sunroof(damned air suspension) but while these seats kick butt, they ended up actually being a hair taller than my GL-10 seats! The front mounts are bolt in, the rear mounts you have to fabricate ... It will be dropped about 1" in the front and 2" in the rear in the next couple of weeks when I have time to move the ecu and I will take some photos.. Quote Link to comment Share on other sites More sharing options...
Warp3 Posted November 23, 2003 Share Posted November 23, 2003 The seats in my '86 RX Turbo Sedan are height-adjustable! Maybe you could find a height-adjustable seat from a junkyard/parts car Subaru and swap it in? Here's a pic of the seats in my RX: I don't have a pic of the height adjustment but it's a crank on the outside of the seat near the front. Quote Link to comment Share on other sites More sharing options...
whiplash-smile Posted November 23, 2003 Share Posted November 23, 2003 Yeah, so do my 88 GL-10 seats... so does the WRX seats, the problem is that they adjust UP more than they do down. What I mean is if you are 6'2" or taller you are hosed even with the seats at their lowest setting. It is almost like the M.E. that designed them was 5'7" or something... Quote Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted November 23, 2003 Author Share Posted November 23, 2003 Originally posted by whiplash-smile Yeah, so do my 88 GL-10 seats... so does the WRX seats, the problem is that they adjust UP more than they do down. What I mean is if you are 6'2" or taller you are hosed even with the seats at their lowest setting. It is almost like the M.E. that designed them was 5'7" or something... i bet he was shorter than that. Quote Link to comment Share on other sites More sharing options...
Warp3 Posted November 23, 2003 Share Posted November 23, 2003 Gotcha...just making sure you weren't overlooking a possible junkyard option if your car didn't come equipped the height-adjust. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 23, 2003 Share Posted November 23, 2003 I'm 6'2" and I don't have any trouble in any of my EA81's - the Brat or the Wagon. I bet it's close tho. Interesting that they got smaller in the height department - they did get wider tho. GD Quote Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted November 23, 2003 Share Posted November 23, 2003 Just install XT seats. I have a set in my GL and I sit like 2 inches lower than normal. You've sat in them Rick, they are a pretty good height yes?? Quote Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted November 24, 2003 Author Share Posted November 24, 2003 Originally posted by GeneralDisorder I'm 6'2" and I don't have any trouble in any of my EA81's - the Brat or the Wagon. I bet it's close tho. Interesting that they got smaller in the height department - they did get wider tho. GD it's not head clearance that i need. w/my new seat cover i gain about a 1/2 inch-1 inch or so. even without the seat cover the angle that my feet hit the pedals fatigues my legs alot faster than most other cars. there aren't any XT in any yards in my area. i'm gonna be making a trip to cheyenne in a couple weeks and i'll check down there. i saw the XT seats and they look like they have alot of lateral suport. Quote Link to comment Share on other sites More sharing options...
WagonsOnly Posted November 24, 2003 Share Posted November 24, 2003 XT seats do have quite a bit of lateral support, the lumbar support is also positioned better and the seat fabrics are higher-quality. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.