oddcomp Posted November 20, 2003 Share Posted November 20, 2003 someone needs the water line under the turbo on a ea82 replaced and beside parts wants to know how much they would have to pay me usually i just tell people what ever they think its worth most of the time i get more than i expect anyways but this person wants a price and i really don't know how much to charge never having replaced one yet i have no clue how long it will take any idea's? btw its a 86 rx with what looks to be dual 02 sensors one before the turbo and one after oh yeah where a good place to get a decent price on the mounting gasket kit? i have seen them as high as 30$ or more so far :brolleye: Quote Link to comment Share on other sites More sharing options...
northguy Posted November 20, 2003 Share Posted November 20, 2003 How badly do YOU want o do this? If you don't, charge the PITA price. Quote Link to comment Share on other sites More sharing options...
Turbone Posted November 20, 2003 Share Posted November 20, 2003 If you have never done this, your in for a PITA. Call Napa and get a price on silicone hose. If its going to be done do all the turbo water lines. You may have to (most likeyl) lift the intake to replace them, so that means you will also need the gaskets for that. Do hope you have a manual? Rob Quote Link to comment Share on other sites More sharing options...
88rxsedan Posted November 20, 2003 Share Posted November 20, 2003 to replace the water line on the bottom of the turbo?? that was not too bad at all, only took me about 40 mins.. Quote Link to comment Share on other sites More sharing options...
soobme Posted November 20, 2003 Share Posted November 20, 2003 Have not done the one on the bottoum, but the one on the top took me 45min. and a week for all the cuts on my hands to heal up:mad: Quote Link to comment Share on other sites More sharing options...
oddcomp Posted November 20, 2003 Author Share Posted November 20, 2003 so 50 ish plus parts? have many manuals hmm i just replaced the intake gaskets about a month ago had a blown drivers side intake gasket who sells silly cone hose by the foot? i actually don't wanna do it and wish they would realize they need to just sell me the rx but at one time they wanted 2k for it.... Quote Link to comment Share on other sites More sharing options...
northguy Posted November 20, 2003 Share Posted November 20, 2003 Trade them a K and your cardboard box. Quote Link to comment Share on other sites More sharing options...
oddcomp Posted November 21, 2003 Author Share Posted November 21, 2003 but but the card board box is where my cable modem and puters reside ... Quote Link to comment Share on other sites More sharing options...
XSNRG Posted November 21, 2003 Share Posted November 21, 2003 That hose doesn't come by the foot, it's a molded hose, get a OEM unit. Quote Link to comment Share on other sites More sharing options...
Caboobaroo Posted November 21, 2003 Share Posted November 21, 2003 you can also go and make it pretty and get the 10mm blue ricer silicone hose from Schucks or Knects for like 20 bucks I think Quote Link to comment Share on other sites More sharing options...
soobme Posted November 21, 2003 Share Posted November 21, 2003 DO NOT use the blue sil. hose from schmucks! I don't know where they get it frrom but it is of VERY low quality. I blew the top turbo line(water) in 2 days when I used that stuff:boohoo: Quote Link to comment Share on other sites More sharing options...
Nug Posted November 21, 2003 Share Posted November 21, 2003 It's good for vacuum hose, and covering other hoses, and that's about it. Quote Link to comment Share on other sites More sharing options...
Turbone Posted November 21, 2003 Share Posted November 21, 2003 As I stated in my first post:banghead: Go to NAPA. They sell it by the foot, in different diameters. And its not the blue crap, its orange/brown in color. I know its not perty, but it works. Rob Quote Link to comment Share on other sites More sharing options...
88rxsedan Posted November 21, 2003 Share Posted November 21, 2003 get the molded hose with the foil **** on it, wasnt that hard to change either, clamps were a biaach, but if you take the spare tire holder / strut bar / all heat sheilds out and reach WAY under there, tis not bad at all Quote Link to comment Share on other sites More sharing options...
baccaruda Posted November 21, 2003 Share Posted November 21, 2003 do the molded foil coolant hose and the oil hose.. both dealer parts. i went in from under the car instead of over. I didn't take the right front axle out and wish I did .. I also didn't unbolt the turbo from the crossover pipe and ... yep, wish I did. If you go that route, you might recommend changing the crossover pipe to turbo gasket as well; they get pretty used up after a while. maybe a new downpipe gasket as well as you'll have to take it off to get the turbo loose. be sure you use some PB blaster or yield before breaking any of those exhaust bolts loose, and use some anti-sieze goop on them when reinstalling. Also, do that RX owner a favor and talk them into letting you open up the bottom of the airbox If I was going to do all of that for someone, I'd ask for $75.. that seems a good price for the better part of a day spent under a car or stuck in the engine bay. Oh, and if you go to Napa, get some of the blue nitrile gloves; they are the best thing since (insert euphemism here) .. $12 for a 100-count box and they hold up much better than latex gloves, and little to no hand washing afterward! Quote Link to comment Share on other sites More sharing options...
88rxsedan Posted November 21, 2003 Share Posted November 21, 2003 i still dont see what the problem is , it was quite simple from the top of the car... Quote Link to comment Share on other sites More sharing options...
oddcomp Posted November 21, 2003 Author Share Posted November 21, 2003 sorry over looked the part where you siad to get the hose at nappy <nightoff> nitril gloves? i usually don't use them when i work on cars little castrol super clean on teh hands works well lol just watch the cuts i will check on oem prices today and give them a estimate oh and 88 rxsedan this 86 rx is a 4door as well 75 sounds good to me put it towards my engine hoist fund hope they did nto damage the engine as she has driven it to work like this a few times :temper: but it didn't get very hot just steaming and such she said Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.