wolfwrangler Posted August 23, 2007 Share Posted August 23, 2007 This question is for anyone who know's....How do you get the front main transmission seal out to replace it on a 1985 Subaru Brat 4WD. I swapped out the old transmission with another used one. I wanted to put new seals in the transmission I was putting in. Forgive me if I missed something in the Chiltons or Hynes manuals, but I didn't see any details on that. I thought it would be easy....I removed 3 or 4 bolts from a plate that is around the front spline and figured it would slip right off and the seal would be behind that, but I couldn't get that plate off, something was still hold it on. In my transmission swap I ultimately skipped replacing the front seal, and replaced the others that I could, and luckily (so far) it is leak free. I would still like to know how to do this in case I need to replace it in the future. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.