rguyver Posted September 29, 2007 Author Share Posted September 29, 2007 So if I was to send you EJ and XT6 backing plates, would you have a chance to do it again?:-p Oh and I had my car apart in the back end and now I know how it all works. I was forgetting the XT6 rotor was screwed to the actual hub and was thinking the rotor WAS the hub and the lugs pressed into it:clap: I could build sets for you if you sent just the EJ backing plates , thats all i need i made a drill jig to line up the new holes , but if you know a shop nearby that can cut you the rings you just need to weld them in and mark out the hloes . if you still wanted me to build them it would be i gess 100$ + shipping , i would weld in the ring redrill the backing plate and repaint and send them back . not sure on the turn around time it would depend on when you got them to me it only accualy takes 3-4h build time . Quote Link to comment Share on other sites More sharing options...
Caboobaroo Posted September 30, 2007 Share Posted September 30, 2007 I could build sets for you if you sent just the EJ backing plates , thats all i need i made a drill jig to line up the new holes , but if you know a shop nearby that can cut you the rings you just need to weld them in and mark out the hloes . if you still wanted me to build them it would be i gess 100$ + shipping , i would weld in the ring redrill the backing plate and repaint and send them back . not sure on the turn around time it would depend on when you got them to me it only accualy takes 3-4h build time . Sweet, I can do that. I'll see how much backing plates from the dealer are through my work but if they're too spendy, I'll get some from a junkyard. I'll see what I can come up with! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.