Danbob99 Posted December 14, 2003 Share Posted December 14, 2003 There is a freaky seatbelt that hangs over the shoulder of the rear seats on both sides, looks as if it would be a shoulder belt, but there is nothing for it to bucklie into or latch into. its just weird....anybody know what the heck these are for or how to use them? Quote Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted December 14, 2003 Share Posted December 14, 2003 GL right? i was in my buddie's loyale today and i noticed that his were connected to the side of the headliner. i also noticed that his car has some feature that mine does not and visa/versa. i haven't looked in my GL yet, but i had simmilar belts in an 88 nova. i know this doesn't really help, but i noticed it in my only friend with a subaru's car. <sense?> this might have some relevance after all. eh. free bump too. Quote Link to comment Share on other sites More sharing options...
GotSubaru? Posted December 14, 2003 Share Posted December 14, 2003 My dad's 89 DL had the seat belt system like this. If you pull the lap belt out and move the fabric on the buckle you will see a set of holes for the shoulder strap to fit in. Attach and adjust and then buckle like you normally would. Hope this helps Kevin Quote Link to comment Share on other sites More sharing options...
ccrinc Posted December 14, 2003 Share Posted December 14, 2003 Is it possible that the receptors have accidentally gotten buried beneath the back seat? Happens all the time in my car.:santa: Emily http://www.ccrengines.com Quote Link to comment Share on other sites More sharing options...
Danbob99 Posted December 14, 2003 Author Share Posted December 14, 2003 no, there is nothing buried under the seat that i'm missing, there are no holes on the lap belt for it, and no holes or latches on the sheet metal unerneath the back seats(they flip up) Quote Link to comment Share on other sites More sharing options...
TROGDOR! Posted December 14, 2003 Share Posted December 14, 2003 They should clip onto the metal side of the buckle on the lap belt. When you have the lap belt buckled, the hole for the latch should just barely protrude. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.