Bluroo Posted December 19, 2003 Share Posted December 19, 2003 oh boy where to start I have what sounds like a bad cv on the rite rear of a 89 DL wagon 4x4. It is the second one this week as the first one sounded bad on the joint next to the tire and had some play in it. I still have the same sound but no play, is it possible to get 2 bad cvs from the same place? If not what eles could it be? I have replaced everything back there including tires. Also does any one have a picture or diagram of the rear diff? The inner workings of one? I cant find one any where. I am about to go nuts trying to figure out what to do hope some one can help. Thanks Quote Link to comment Share on other sites More sharing options...
StormTrooper Posted December 19, 2003 Share Posted December 19, 2003 try romoving the wheel, hub, axel nut etc..and see if there's play in the stub axel (spindle) that is inside the rear control arm. let us know what you find. good luck, Quote Link to comment Share on other sites More sharing options...
Bluroo Posted December 19, 2003 Author Share Posted December 19, 2003 I put new bearings in new breaks new cvs and no noticable movement any where.Why what you think may be wrong? Quote Link to comment Share on other sites More sharing options...
StormTrooper Posted December 19, 2003 Share Posted December 19, 2003 I have been a victim of rear end goblins that have driven me nuts, and the wierd noises were attributed to a loose castle nut that ended up causing play in the stub axel, which eventually made a lot of heat and ate through the bearings and into the control arm. if the bearings werent pressed in all the way, you can think that you tightened the castle nut all the way sown, when in fact the stub axel wil still have a certain amount of play. Quote Link to comment Share on other sites More sharing options...
GLCraig Posted December 19, 2003 Share Posted December 19, 2003 Check the U-Joint on the drive line from the transmission to the rear diff. When they go bad it sometimes sounds like a bad CV. Quote Link to comment Share on other sites More sharing options...
v8vega215 Posted December 19, 2003 Share Posted December 19, 2003 The insides of a diff can be seen in the USRM under "changing your limited slip 3.7 to 3.9", that should be under the trany Icon. Quote Link to comment Share on other sites More sharing options...
Bluroo Posted December 19, 2003 Author Share Posted December 19, 2003 Thanks folks the castle nut may be to problem I will check it and let ya all know, thats the only thing I didnt think of. The drive line is new a month ago, u-joints went. Thanks for the info on the rear diff. I will look at that. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
calebz Posted December 19, 2003 Share Posted December 19, 2003 Originally posted by StormTrooper I have been a victim of rear end goblins ...... Perhaps a good therapist can help you overcome that:grin: Maybe if you moved a little further away from san francisco, you would stop running into all those 'rear end goblins' Sorry, I couldn't resist. back on topic.. The only way you are going to be abnle to pinpoint whats loose, is be getting under the car and wiggling every joint, nut and bolt in the rear of the car. Remember , just because its new doesn't mean its good! Good luck Quote Link to comment Share on other sites More sharing options...
StormTrooper Posted December 19, 2003 Share Posted December 19, 2003 doh!! Damn those goblins!! I wake up screaming sometimes... Quote Link to comment Share on other sites More sharing options...
Sweet82 Posted December 19, 2003 Share Posted December 19, 2003 Brakes can knock when they wear a bit??? What kind of sound is it? A blown/bad shock can cause noises to happen and telegraph around the car? Hummmm?:cornfuzz: Glenn 82 Hatch, has knocked because of brakes and shocks! 01 Forester, better not knock! Quote Link to comment Share on other sites More sharing options...
Bluroo Posted December 19, 2003 Author Share Posted December 19, 2003 ok I've checked the castle nuts all are at 145lbs still have the noise. Sounds just like a bad cv joint. I will jack the car up and see if anything is movin that shouldnt. I dont have any idea what eles to do. How far from S.F. do I need to move? Think the Ghostbusters will help? Any more iedeas folks?TIA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.